APS CRS M4 - battery cover replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement battery cover for the APS CRS (Collapsible Rifle Stock) M4.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 1
- Views
- 198
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi!
This is a replacement battery cover for the APS CRS (Collapsible Rifle Stock) M4. The Cover will snap into the Stocktube on one end, the other end functions as a joint for opening/closing.
The bolt and nut do work, but they're to be seen as temporary fix, especially the nut is so delicate that I can't guarantee it will hold up very long. After printing, you should take a steel M4 Screw and Nut and CAREFULLY screw them into/onto the printed parts to give the printed threads a better shape and make them work properly.
Print the battery cover standing with paint on supports as shown in the picture. you do not need to, but I advise you to also support the upper part to give the print some stability during printing.