1 / 2
Lens cap for the Canon 10x30 IS — zdjęcie 1
1 / 2

Lens cap for the Canon 10x30 IS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a captive, objective lens cap for the Canon 10x30 IS binocular.

Ocena
0 / 5
Polubienia
1
Pobrania
38
Wydruki
0
Wyświetlenia
204
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

The goal was to create a lens protector that is both secure and captive, but also easy to quickly remove and replace in the field. Securing the elastic to the binocular requires some tedious knot work, but I think the result is worth it.

Print flat on the bed with supports for the the attachment points. I used PLA+ but almost any material should work. Also needed: some 3mm elastic cord and a bit of string. 

Tagi