1 / 1
JeNo 5.1 Capacitor + Spike Absorber + Vifly Finder Mini support — zdjęcie 1

JeNo 5.1 Capacitor + Spike Absorber + Vifly Finder Mini support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Descriptions : Details : Printing details : More Informations :

Ocena
0 / 5
Polubienia
5
Pobrania
97
Wydruki
0
Wyświetlenia
539
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a, Capacitor + spike absorber + Vifly Finder Mini, support for a JeNo 5.1 Frame. 

The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french community WeAreFPV.

Details :

I have a 10mm capacitor and a Vifly Finder Mini, and none of the current supports for JeNo fit well. So I decided to make my own support for a Capacitor + a Vifly Finder Mini. I add a space for a DIY spike absorber.

I built my own spike absorber with three TVS Diode solder  in parallel on a Universal prototype PCB matrix.

There is a place in the middle to pass the camera wire through.

I update the model for a 12mm capacitor

Printing details :

Print on a prusa i3 MK3S+:

  • Infill : 100%
  • Rafts: No
  • Supports: No
  • weight : 3.6g
  • printing time : 57min

More Informations : 

For more details refer directly to the JeNo 5.1" Product page

Tagi