Logitech Brio mount for LG OLED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches Logitech BRIO webcam to LG OLED TV. This is a steeper angle remix of @ebi_178380's design, with fusion 360 file
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I printed @ebi_178380's design and the angle wasn't right for my usage as the top of my head was about the middle of the camera feed. I completely remade the model in fusion 360 and adjusted the angle so that the top of my head is about 80% of the way up the feed which makes for a much better experience in online meetings. I also tightened the tolerance a small amount on the screen and there is still a little extra room.
The camera mount took a fair amount of pressure to snap in, but it's pretty solid once in. If it is too tight, you might need to file it just a bit before inserting (I thought I might need to file, but just as that thought crossed my mind it snapped in :)
Original design idea goes to @ebi_178380. I used his part to model mine which saved time in the modeling process. I've included the stl and the fusion 360 file. I hope someone finds it useful! If you want to change the angle, find the triangle sketch in the fusion 360 timeline and edit it to your liking. The picture and a short gif in the photos section should help you find it.
I printed it in black amazon basics PETG with 0.3mm layer height on a 0.6mm nozzle with 15% infill without supports or brim.