Logitech Brio mount for LG OLED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches Logitech BRIO webcam to LG OLED TV. This is a steeper angle remix of @ebi_178380's design, with fusion 360 file
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 74
- Makes
- 0
- Views
- 490
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I printed @ebi_178380's design and the angle wasn't right for my usage as the top of my head was about the middle of the camera feed. I completely remade the model in fusion 360 and adjusted the angle so that the top of my head is about 80% of the way up the feed which makes for a much better experience in online meetings. I also tightened the tolerance a small amount on the screen and there is still a little extra room.
The camera mount took a fair amount of pressure to snap in, but it's pretty solid once in. If it is too tight, you might need to file it just a bit before inserting (I thought I might need to file, but just as that thought crossed my mind it snapped in :)
Original design idea goes to @ebi_178380. I used his part to model mine which saved time in the modeling process. I've included the stl and the fusion 360 file. I hope someone finds it useful! If you want to change the angle, find the triangle sketch in the fusion 360 timeline and edit it to your liking. The picture and a short gif in the photos section should help you find it.
I printed it in black amazon basics PETG with 0.3mm layer height on a 0.6mm nozzle with 15% infill without supports or brim.