Modular Locksport Organizer - v5.1 (now 2D) - 9/25/2024
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular locksport organizer for your growing set of tools. Pick stand, tensioner stand, follower stand, etc.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 210
- Wydruki
- 3
- Wyświetlenia
- 1397
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
If you just want to buy these, I make them to your specifications on my store. Check out this link, but please read the description carefully: MLOS Made to Order
The problem being solved: Existing pick/tension wrench/follower stands and organizers don't offer flexibility, customization, and ability to scale as your collection of locksport tools grows. You seemingly have to commit to something that just doesn't quite fit your particular needs. And it is often the case that these types of organizers try to solve for all problems at once, becoming a rather large print in terms of time and material.
The solution: A modular organization system for locksport that allows you to decide what components you need, and can scale up over time.
Features:
- Scalable (in 2 dimensions now), like legos. Put together the components you need, when you need them.
- Material and time efficient. These models aren't behemoths. You can print one relatively quickly and not use a ton of material.
- Each module will fit within basically every printer's build volume.
- Customizable. You pick the modules you want and link them together.
- Connect modules with 3D printed round pegs or 6mm X 3mm magnets. Your choice.
- Generic modules provided as STEP files for you to customize and make your own designs. (Please read the design guidelines below if you intend to create and share your own module design).
- Standardized module sizes broken down into custom units: .5U, 1U, 2U.
- Stylish? I think so, but I'm biased. :P
I make and sell a LOT of 3D printed locksport tools for people. By far, the most requested product was a lock pick stand. There are plenty of beautiful options that others have created. Myself, and I believe others, have been looking for something that can better suit individual needs and be flexible enough to change over time.
This modular locksport organizer was borne out of these needs.
Available Modules
End Cap (1U) Modules:
- [Left Pocket] - Left side end cap with slots for tension wrenches and a storage pocket.
- [Right Pocket] - Right side end cap with slots for tension wrenches and a storage pocket.
- [Left Side Pocket Follower] - Left side end cap with storage for 4 followers.
- Diameter 1: 14.6mm
- Diameter 2: 13.2mm
- Diameter 3: 13mm
- Diameter 4: 10.4mm
- [Right Side Pocket Follower] - Right side end cap with storage for 4 followers.
- Diameter 1: 14.6mm
- Diameter 2: 13.2mm
- Diameter 3: 13mm
- Diameter 4: 10.4mm
Mid 1U Modules:
- [Follower Stand] - A middle module at 1U width designed to hold 4 followers.
- Diameter 1: 14.6mm
- Diameter 2: 13.2mm
- Diameter 3: 13mm
- Diameter 4: 10.4mm
Mid 2U Modules:
- [Pick Stand] - A 5x4 grid of storage channels (16mm X 12mm) for your standard sized picks.
- [Wide Pick Stand] - A 4x4 grid of storage channels (15.4mm X 18.696mm) for picks with larger handles.
- [Dimple Pick Stand] - A 5x3 grid of storage channels for dimple picks (11mm diameter).
- [Wide Dimple Pick Stand] - A 4x2 grid of storage channels for dimple picks (13mm diameter).
- [Sparrows Trainer Lock Stand] - Holds up to 3 Sparrows Trainer Locks.
- [Scandi Stand] - Holds up to 3 Scandinavian oval locks.
Y Axis Extender Modules (.5U):
These modules allow you to connect 2 or more rows of modules in the Y axis. You will need at least one Y Axis extender per row that you want to join together. They are designed to sit somewhere in the middle of one row of modules, and then connect in the Y direction to another Y Axis extender via magnets in the back and front. They currently double as another place to store your tensions wrenches, too.
There are 2 versions to suit your needs:
- [Y Extender with Clean Face] - Y extender designed to be used in the front row. There are no magnet holes in the front of this module to keep the front row module faces looking clean.
- [Y Extender with Front Magnets] - Y extender to be used in the 2nd row and beyond. There are magnet holes in the front and back for connecting rows together in the Y axis.
Hardware (for joining modules):
- Magnets: 6mm X 3mm disc magnets are what are recommended. These press into the holes on the modules and should stay in place (friction fit). If they are too loose, a dab of super glue will do the trick. Magnets make rearranging the modules super easy. It's definitely the best way to go.
- 3D printed round pegs (STL provided): This is a fallback option for those who can't, or don't want, to go the magnet route. These are a very tight friction fit, and slot into the holes intended for the magnets to join two modules together.
Custom Module Design Guidelines
Intend to create your own custom module for use in this system? Awesome! I have provided generic module STEP files where the internals of each module have been hollowed out. The idea was to make it easy for you to hit the ground running, and fill in the void with your own custom creation.
Here are some guidelines for ensuring you stay true to the design language and original intent. These rules may also prevent you from making a mistake, like accidentally cutting away material and breaching into the area where the magnets are supposed to go ;)
- Please do NOT cut away material on the internal walls and floor of the generic modules. The wall and floor thickness provided to you is already the thinnest they can possibly be, without introducing potential issues (like breaching into magnet holes, for example).
- Please try to avoid adding any new material above the height of the sloped roof of the modules. This isn't a hard and fast rule (you can do whatever you want). But the reason you might want to avoid it is to keep the clean and consistent roof slope going the whole way down your row of modules.
- Is your custom module going to be a finishing piece at the end of a row of modules? Choose either the left or right generic end cap STEP files as a starting point.
- If it's not a finishing piece (end cap), then you should determine how much horizontal space you are going to need for your module.
- .5U modules are currently reserved for extending modules in the Y direction. However, generic versions of these have been provided if you want to do something interesting with the small amount of space available within this module.
- 1U modules are narrow, but are good for things like holding followers, or other long tools that you maybe only have a couple of.
- 2U modules are the widest current module size available. These are generally used to maximize the amount of space to solve a problem. For example: holding a bunch of picks, holding locks, etc.
- SHARING YOUR DESIGN:
- If you create a new module that you would like to share with the world, GREAT! It's really your choice how you do it, but I'd suggest you contact me (eschlenz) so that I can:
- Incorporate your module into the common CAD file used for this project.
- Ensure the design guidelines are adhered to.
- Provide all available modules in one place (here).
- GIVE YOU CREDIT IN THIS DOCUMENT.
- However, if you want just host your module under your own Thingiverse/Printables page, that's fine too. At the very least let me (eschlenz) know it exists so I can maybe provide a link to it from this page.
- If you create a new module that you would like to share with the world, GREAT! It's really your choice how you do it, but I'd suggest you contact me (eschlenz) so that I can:
Printing Instructions:
- Modules:
- 15% infill
- .2mm layer height
- At least 4 perimeters for walls
- NO SUPPORTS NEEDED
- Pegs: You may need to experiment with the diameter of the peg to get a perfect friction fit. The ones I provided are just about perfect for me, when printed on a Bambu Labs X1C.
- 15% infill
- .1mm or .2mm layer height (shouldn't matter)
- Print upright on a raft
- (Raft will help prevent the small diameter part from getting knocked over mid-print).
Update V5.1 - 1/15/2025
- It was discovered that some Sparrow's trainer locks had shallower bevels meaning they weren't fitting in the Sparrow's Trainer module. The slots in this module have been widened to accommodate this.
Update V5.0 - 9/25/2024
- Now in 2D! That's right. Using the Y Extender Modules, you can now start connecting more than one row together.
- Rounded pegs introduced (if you don't use magnets) to link modules together. They simply slot into what are primarily meant to be the holes for the magnets.
- Rectangular pegs and corresponding holes are now DEPRECATED.
- V5.0 modules are backwards compatible all the way back to V4.2 where magnets were first introduced to the system.
- Bottom magnet holes? Yes, there are holes on the bottom of modules now. These are intended for future use (potentially). If you find a use for them now though, by all means, use them.
Update V4.6 (also V4.5) - 9/1/2024
- Added the Scandi Oval 3-wide lock holder. This is a contribution by community member Millizard. Big thanks to him!
- The only difference in V4.6 vs V4.5 is simply me assigning a name to the new Scandi module in the CAD design. STLs, etc are the same between these two versions.
Update V4.4 - 5/15/2024
- Fixed 1U follower stand magnet hole diameters. They were oversized at 6.9mm but were supposed to be 6.1mm.
Update V4.3 - 4/27/2024
- Sparrows Trainer Lock stand dimensions fixed
- Wide dimple pick stand module added as an option
- Follower holes widened
Update V4.2 - 4/14/2024
- Modules can now be connected with 6mm x 3mm disc magnets, or you can still use the printed pegs. The new modules are backwards compatible with peg-only modules. The holes for the magnets are designed to be a press/friction fit.
- By request, there is a new module for wider/thicker picks. It is a 4x4 grid and can fit picks like Moki picks with the Hazzert handles.
- STEP files for generic modules have been provided for you to more easily build your own. These generic modules have all of the internals removed out, just leaving the important features (walls/floor/etc) in place. The idea is that you can take one of these generic modules and build out whatever you need in the internal area available. Please avoid changing anything outside of the internal working area, so as not to affect the overall system design/principles.
Update V3.6 - 4/11/2024
- New middle module for dimple flag picks (11mm diameter hole)
- New middle module for storing Sparrows Trainer Locks. Holds 3.