Voron Switchwire - Bearing PTFE top slot guide (BOWROLL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for the original PTFE feed slot on Enderwire/Switchwire.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 252
- Wydruki
- 4
- Wyświetlenia
- 1844
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The original Switchwire/Enderwire top PTFE/Bowden slot offers a lot of movement, but not a great chamber sealing. Temperature easily escape.
I tried to find a way to seal up the chamber..but also ensure enough X axis movement up to a printing height of ~170-200mm is ensured. I call it BOWROLL!
So here is my approach with 625ZZ bearing rollers to ensure a smooth bowden movement along with good X-axis and Z-axis travel.
BOM :
- 1x printed feed slot
- 1x printed housing
- 2x printed roller
- 2x printed counter block
- 4x 625ZZ bearing
- 4x brass heatset insert (M3x5mm)
- 2x M5x18mm screw
- 2x M5 nut
- 4x M5 1mm shim/washer
- 2x M3x6mm screw
- 2x M3x8mm screw
Tipp - Cut off the POM wheels from your spare V-slot Ender 3 wheels. Every wheel contains 2x 625ZZ bearings!
For reference :
Here is the link to the side Bowden mount