TP-LINK DECO X50/X60 Cooling Fan Add On
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is made to allow a 60x15 12V fan to fit inside the TP-Link DECO X50 and X60 to help for cooling.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 1338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design was made to prevent my DECO X50/X60 from overheating. It alllows a 60x15mm 12V fan to fit inside. This fan can be powered by soldering it on the 12V power socket on the motherboard of then DECO router. I personnaly used a NOCTUA NF-A6x25 fan with the Low Noise Adaptors sold with it.
You can replace the original internal part with this design and add the Fan cover on top with 4 M3x30mm screws and heat inserts. You also need 2 M3x8mm screw and 2 heatinserts to fix the moyherboard to the new internal part. Is also added an optionnal stand to allow more air coming in from the bottom of the deco. The fan is pushing the air from bottom to top.
Warning: warranty void if you open the DECO. Do not attempt if not confortable with electricity and soldering basics.
Printed in SUNLU PLA+
0.3 Layer Height
0.6mm Nozzle
Supports needed