Rear ESC mount for yokomo yd2z
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
rear esc mount for yokomo yd2z. mulitple options depending on how you want to mount and if your a VHB heathen or not.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Two base holders.
Both models use thread serts, these ones specifically, but any 3mm based one would work:
One holder is flat without nubs and sad. It is sad because it is designed to be used with VHB. Look how sad you make it.
The other is a bottom mount for the top cage. Designed around the bl-rs4 ESC. The bottom accepts thread-serts and the top cage physically attaches to the esc. Then the cage itself attaches to the mount. Then your not peeling off tape and adding tape back every time you want to do anything where you have to move the ESC.. The cage also accommodates the switch on the left and the capacitor pack on the right, look how happy it makes the ESC holder!
Print in saved orientation, this is for strength. If you print in slicer orientation your putting layer lines in sub optimal location. Use supports