1 / 4
Duct Mount with printed hinge - 4in, 5in, and 6in — zdjęcie 1
1 / 4

Duct Mount with printed hinge - 4in, 5in, and 6in

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach ductwork to wall or ceiling, features a convenient closing hinge.

Ocena
5 / 5
Polubienia
9
Pobrania
101
Wydruki
1
Wyświetlenia
251
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Thank you Scott Walsh for permitting a remix of your great design. Here's his video which describes how they're used and some helpful tips on putting together dust collection system.

No support needed. PrusaSlicer complains about unsupported bridging, unfortunately this is required for the hinge printed in this orientation. I used .2mm layers, 20% gyroid infill and 3 layer walls.

Loosening the hinge from the initial print can be accomplished with some gentle taps. The key is to break the material between each layer without damaging the hinge. I added some internal walls to help prevent this.

Use #8 flat head screws to attach to wall/ceiling. Use a #6-32 1 1/2in machine screw for the clasp, with #6 washer and nut.

Tagi