1 / 4
Duct Mount with printed hinge - 4in, 5in, and 6in — image 1
1 / 4

Duct Mount with printed hinge - 4in, 5in, and 6in

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Attach ductwork to wall or ceiling, features a convenient closing hinge.

Rating
5 / 5
Likes
9
Downloads
101
Makes
1
Views
251
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Thank you Scott Walsh for permitting a remix of your great design. Here's his video which describes how they're used and some helpful tips on putting together dust collection system.

No support needed. PrusaSlicer complains about unsupported bridging, unfortunately this is required for the hinge printed in this orientation. I used .2mm layers, 20% gyroid infill and 3 layer walls.

Loosening the hinge from the initial print can be accomplished with some gentle taps. The key is to break the material between each layer without damaging the hinge. I added some internal walls to help prevent this.

Use #8 flat head screws to attach to wall/ceiling. Use a #6-32 1 1/2in machine screw for the clasp, with #6 washer and nut.

Tags