Vacuum Adapters for Woodworking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A few adapters I made for my shop
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 1178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I hate cleaning up all the sawdust after doing projects for the house. So I decided to make a few adapters for my shop vacuum to catch the dust before it can be blown everywhere. The models that I have tested this with are:
Shop-Vac Model 85L250B
Kobalt Tablesaw Model KT10152
Kobalt Mitersaw Model 0857240
Craftsman Bandsaw Model 113.243310
These may work with other brand tools, The measurements are as follows to check if they will work for you:
Vacuum Hose: ~30mm OD
Tablesaw: ~64.3mm OD
Mitersaw: ~34mm ID
Bandsaw: ~55.6mm ID
The only model I printed with supports is the one for the bandsaw, I designed the rest to not need them. The layer height that I used was .24mm, printed with all walls. I'm including the Freecad files encase you wish to make any fine adjustments to the fit.