USB Type-A Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps for covering USB Type-A ports
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 106
- Wydruki
- 9
- Wyświetlenia
- 980
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
USB Caps! – Type A
These are cute little USB caps that can fit into a USB Type-A port. Use the OpenSCAD file to print your own text or merge it with another model to make them truly yours!
I tried to emboss the Undertale dog, but my printer is not perfectly calibrated. The USB will still function fine as a cap.
Originally I intended for these to take 22 gauge wire and act as a quick and dirty 5V power supply from a computer USB port. It will work, but the holes on the bottom will not print properly if your printer tends to over extrude and you'll likely need to drill a hole somehow to feed the wire through and glue them in place.
⚠ If you do the above, make sure that the wire only contacts the pins and not the outside enclosure, as they are usually metal and will short