1 / 4
Magnetic holder for Clas Ohlson/Cotech thermo-/hygrometer — zdjęcie 1
1 / 4

Magnetic holder for Clas Ohlson/Cotech thermo-/hygrometer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hygrometer holder for filament drybox

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I have found this to be more accurate than the round or rectangle hygrometers you can get from Amazon. After a while I got tired of having to constantly search the bottom of my drybox for it and designed a proper holder based on a good silica box I found, which would suit this purpose with fairly minor modifications. The four 10x2,5mm magnets need to be glued in place, make sure to align them correctly before that.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.2

Infill: 

25%

Filament: Any PLA

Tagi