1 / 2
Single-slot GPU Display Stand Pcie Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GPU Display Stand
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 135
- Wydruki
- 0
- Wyświetlenia
- 548
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
Very low filament of the GPU display stand made by IVIarc_Antoine.
I also made a more stable double slot stand. I used it to re-organize my gpu drawer. Check it out >here< if you want
It's a bit scuffed, but it does what it needs to. Don't use with gpus with heavy heatsinks, it will fall.
Print time is around 20 minutes at 60mm/s, only 3-4g of filament each
