ERCF JailBird modular filiment buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ERCF filament buffer and storage, the cottontail is a hassle so why not have the filament retract around its own roll
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1734
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
here is my Jail Bird modular filament buffer system
it is modular so it is infinate expandable, designed to be used with all ercf, mmu & tradrack systems as well as stock printers, this is my v1 and will be work in progress but works very well.
as your filament retracts it needs somewhere to go, this system will allow the filament to retract around its own spool without tangling or getting snagged and it is alot easier to manage than the ercf cottontail
parts required per module are: 1x pc4-m10 pneumatic bowden fitting, 8x 608zz bearings,6x m4x12mm screws, 4x m3 knurl nuts (4.5mm diameter 4-8mm long), 6x m5 10mm (if rail mounting), 2020 rail mount recommended for more than 4 modules
optional needs 8x 5mmx3mm magnets for the lid
feel free to pm me with any feedback or suggestions
Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)