1 / 2
Stealth Press with Smooth rods (reuse from MK3/4 Y axis)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have an old smooth rods and bearing from your MK3/4 Y axis, then you can have the Stealth Press.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 638
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)Powiązane
This remix only pretends to build the same tool buy cheaper, the way to achieve that is to reuse the old spare parts from your MK3/4
Here is the BOM for this remix:
| Mechanical parts | QTY |
|---|---|
| M3x8 SHCS — Bolts || Source: [Link] | 30 |
| M3x20 SCHS — Bolts || Source: [Link] | 2 |
| Toothless Pulley 16T or 20T Bore 3mm || Source: [Link]) | 4 |
| M3 — Threaded Inserts — M3x5x4 (M3 x OD:5 x L:4) || Source: [Link] | 30 |
| Smooth rods 330mm (Y axis of MK3/4) | 2 |
| LMUU8 Bearings | 4 |
| M3x12 SHCS - Bolts | 4 |
| M3 Square nuts | 4 |
| Retractable device | 1 |
| Key-Bak — Super48 36" 13oz (Recommended) || Source: [Link] — or — | |
| Not a Key-Bak® (Budget savvy alternative) || Source: [Link - select 500g version] | |
| Any other cheap key-back, but you will have to take care of the retraction. |
Any other information about the tool could be find in the original model https://www.printables.com/es/model/609644-stealth-press-heat-set-insert-press