1 / 2
Stealth Press with Smooth rods (reuse from MK3/4 Y axis)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you have an old smooth rods and bearing from your MK3/4 Y axis, then you can have the Stealth Press.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 1
- Views
- 638
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
This remix only pretends to build the same tool buy cheaper, the way to achieve that is to reuse the old spare parts from your MK3/4
Here is the BOM for this remix:
| Mechanical parts | QTY |
|---|---|
| M3x8 SHCS — Bolts || Source: [Link] | 30 |
| M3x20 SCHS — Bolts || Source: [Link] | 2 |
| Toothless Pulley 16T or 20T Bore 3mm || Source: [Link]) | 4 |
| M3 — Threaded Inserts — M3x5x4 (M3 x OD:5 x L:4) || Source: [Link] | 30 |
| Smooth rods 330mm (Y axis of MK3/4) | 2 |
| LMUU8 Bearings | 4 |
| M3x12 SHCS - Bolts | 4 |
| M3 Square nuts | 4 |
| Retractable device | 1 |
| Key-Bak — Super48 36" 13oz (Recommended) || Source: [Link] — or — | |
| Not a Key-Bak® (Budget savvy alternative) || Source: [Link - select 500g version] | |
| Any other cheap key-back, but you will have to take care of the retraction. |
Any other information about the tool could be find in the original model https://www.printables.com/es/model/609644-stealth-press-heat-set-insert-press