Volvo P2 to P80 Fender Side Marker/Blinker Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips to modify P2 fender blinkers to fit/snap on P80 (850/S/V/XC70) Volvos.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So I saw several people adding P2 Fender Blinkers to their P80's (850/V/S/XC70) and could not find any instructions or decent way of doing, so I modeled the clips that are on the P80's and epoxied them on the P2 blinkers.
I'd rather do this than using glue on 20+ year old paint, plus it keeps the modification simple for maintenance if you want to change the bulbs.
Currently waiting for LED markers to do this to as well, but for the time being the salvaged P2 blinkers are fine.
Load the print, drop to the table and leave sideways to retain springiness, 20% infill PETG with no supports.
Go easy on the epoxy though, I didn't and the fit was a little snug, so I fixed the models to accommodate goop. I used 1mm vinyl/rubber as a weather seal and to protect the paint, but after comparing with the original ones they are 2.5mm or 3mm thick foam. Use the thicker if you can find them.
