Liczymy pasujące modele…
General Pressing in the subframe bushings (e.g. 3507923, 3507924) into Volvo P80/P2 subframes is challenging, because they sit very tight, have to be oriented correctly and when pressing on the rubber “crown” or the inside part of the…
I wanted to print some 17" wide Panoramas with my Epson SureColor P800 but want to spend $200 for the Epson branded one. 3d printing it cost less than $50 including hardware. For all parts I used .28mm layer height .4mm width at 30%…
The center tab of the kickpanel on the drivers side in P80 series Volvos (V70I, S70) tends to break. Since it is the only screw holding the kickpanel in place, it is a rather important mounting tab. Repairing it is difficult since the…
This is a subframe bushing insert I modeled for the P2 and P80 chassis Volvo's. It is inspired by the IPD Subframe Bushing inserts (linked below). I bought a spare bushing and created my own design as shipping their parts to Canada was…
A stand for my Weller WSP80 soldering iron. you may have to stick some weight to the bottom. Although it will do it's work as is. No supports needed. Print instructions no support needed
New Paddle designed and shared at: Clocking Holster Paddle by Sheisster | Download free STL model | Printables.com Paddle and cogs are remix from FileFoundry's PT-111 Holster files. Holster is designed with a finger release and easy mount…
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
I worked on a grip type Walther GSP for my PP800. I recommend some sculpting application like SculptGL to modify the Standard grip and leave it in the shape of the user's hand. Best sence with 50 % Infill
Info: STL / DXF files, instructions and drawings will follow when the first prototype with AR15 grip and mount for the yet to be developed folding stock with magnetic lock has reached a development stage for you to test. The STL files…
My own take on Stealthpress mods
the plan was to drill some holes and fix the unit in place, but it's really snugly, so I think it's not even necessary
I followed Sheisster's build instructions for this; the only difference was that I used a single-coil spring for the finger lock.
Im Beispielfoto mit Prusament PETG (0,2mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…
Part Cooling Fan Duct upgrade for the TronXY P802MA printer Category: 3D Printer Parts
Print settings: Nozzle: .4 or .2 (The teeth that grip the valve stem require a finer nozzle), Layer Height: .16, Material: PETG/ASA/Nylon (something that does well exposed to moisture), No supports should be needed. This stem/handle…
If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff New larger thumb wheel design for my TronXY P802E. (sure it could be used with other things/printers as well). Appox. 30mm across x 10mm high…
Zonestar P802QR2 X Axis Mounts In this remix I have: Manually repaired the STL files so that they are now printable (The file I downloaded appeared to have some mesh issues and would not print correctly. Optionally, I have modified both…
My Collection of mostly remixes\upgrades for the Zonestar P802QR2. I have uploaded a Obj and 3DS file with all the relevant 3D models included if anyone wants to improve them further . The things can be found at the folllowing links…
Completly redo from scratch based on the idea of this the remixed item down here. The gauge si a litle bit outer of the vent to fit longer pod. Parts fit more well in the OEM vent. Added more round edge so the printer have less artifact.
Thumb nuts for bed leveling screws. Made as large as possible to accommodate large hands in tight spaces. Use M3 hex nut... hex fits snug in PLA Designed around TronXY P802E... Will probably fit other similar printers UPDATE: 3/9/2017 - I…
Print this and it's mirror and bolt together using Tronxy's original hardware plus 2 m3 screws and nuts. Get the other parts from https://www.thingiverse.com/thing:2149867 Print instructions Category: 3D Printer Parts Print Settings…
Frame braces I made for my Tronxy P802E that got rid of most of the wiggles. I made some revisions to a few parts after making the ones that are on my printer so some will look a bit different then in the photos. The braces on the front…
Printable dust cover for the Kenwood Universal Connector (KUC) Uses an M4 thumbscrew - I used these M4 x 20mm thumbscrews from Amazon and cut them down to fit. Print on its side - the small retaining tab will break unless you make sure…
Old design broke at 20% infill+4 walls in PETG, BEEFED up the design and upped to 30% infill. Still had problems with the design and the load cover was slugghish on return, V3 shortened the BEEFED tube to avoid any problems with the…
Having the bed shift on the wobbly springs mid print is very annoying so here is my answer. A cup part on one end and a post on the inside on the other. This tightly constrains the spring while still allowing plenty of adjustment range.…
I needed replacements for my mounts that were slowly deforming in my heated enclosure(40C) due to them being made from pla. Also, as is standard for Tronxy, the mounts came with warping by the threaded bushings that required me to shim. I…
This is a new and improved cooling duct design for my E3D V6 mount design https://www.thingiverse.com/thing:2536764 that I made for my Tronxy P802E. This duct is much smaller than my crazy wide duct I posted initially. It is half the size…
This is a DDR RAM slot clip specifically designed for the ASUS P4P800 motherboard. I got this board for a vintage gaming build but it had a missing clip on the of the RAM slots. I have also included the CAD file so this can be modified…
So I saw several people adding P2 Fender Blinkers to their P80's (850/V/S/XC70) and could not find any instructions or decent way of doing, so I modeled the clips that are on the P80's and epoxied them on the P2 blinkers. I'd rather do…
This is a remix of a Z-axis upper brace with bearing by nilocwng but for the Zonestar P802QR2. You will see need a pair of bearings. I got mine from the following site:…
This is a pen holder holds pens with ~10mm diameter and is installed instead of the proximity sensor on the right side of the extruder. This allows for fast switching between regular printing and pen holder mode. You can use it to create…
Power supply cover upper and lower ( allows for fan breathing and a cheap 1$ light switch for the power switch ) as well vertical hulk braces with hexagon decor designed to hit all the precut screw holes inteh acrylic frame. this adds…
AI generated cars! 1994 Toyota Starlet ep80 White Picture is lower poly (V1) Pink picture is higher poly (V2) two different versions of the same car to choose from. I was surprised by the results when I tried using AI This was done by…
This is an essential 3D-printable accessory for anyone using the professional Weller WP80 soldering iron. Designed for a perfect fit, this custom stand securely holds your WP80 iron when not in use, preventing damage to the tip and…
This is a simple thing that I changed on my Tronxy P802E that made a BIG improvement on getting a consistent bed level from print to print. I replaced the horrible acrylic bed undercarriage with a solid homemade aluminum one. I went with…
Zonestar P802QR2 60mm Fan Duct About the only thing I have not had problems with the Zonestar P802QR2 is layer cooling so this thing may be a little OTT. The thing was inspired by a comment from the9rtyt regarding using 2 fans for…
Zonestar P80QR2 Fan Duct. Inspired by msavazzi`s duct - https://www.thingiverse.com/thing:2860576 but designed from scratch in SU18. Please note this will not work with the bed levelling sensor. Product Features Internal fixings to allow…
For the S-240-12 model psu. Printed at 100% infill and .3mm layer height. Recommend to print upright with 10% support. There are different power supplies that come with these printers so look at the pics and make sure you have the same…
I made these to reposition my bed motor on my tronxy p802e. My old motor was wearing out and I wanted to make room for a better more powerful motor. Also, I wanted a better belt clamp that would make sure the belts were fairly level. The…
2 sizes of filament guides for the Zonestar P802QR2. The brackets attached to existing M3 screw holes in the main chassis. The Left guide includes 3 hoops for attaching cable ties to aid cable management above the motherboard. Collection…
HIDIZS AP80 Digital Audio Player Drawn and measured by hand/eye with calipers, so it might be a few fractions of a mm off. I'll be using this model to design a belt clip/case for my AP80, so I will upload that and update this model as I…
This is a Motherboard enclosure for the Zonestar P802QR2. I am still having some extruder shifts with my current fan\enclosure so I decided to design a much more spatially generous motherboard enclosure to accept a 120mm diameter stock…
This is a set of extruder mounts for positioning the Extruder Assembles on the Zonestar P802QR2 X Axis Carriage. The advantages of this are: 1.Reduces the Boden Tube length by a third and therefore reduces stringing (see uploaded image of…
This is a remix of dfmsguitar`s excellent Power Supply Cover for the Zonestar P802QR2. In this remix I have Included more ventilation. Tweaked size slightly to accommodate the smaller version PSU. Included 2 tab returns to the back of the…
This is a remix of nilocwng`s excellent Z-axis brace for Zonestar P802QA. I have increased the thickness of the base plate a little, extended the forward webs and threw in a few rads. This and the upper Z axis brace make a very big…
The parts that came with the printer to hold the smooth rod were pretty mickey mouse and couldn't be tightened neatly without shimming due to the rods sticking above the frame quite a ways. I left extra room above the rod and added…
Adaptor to fit the Wiiboox LuckyBot 3D Printer Food Extruder to Tronxy P802, Anet A8 and Similar 3D printers. Will require 2 off M3 x 20mm cap head screws to fit belt ends around.
PP800 - Diana Bandit Baffle Cone 5.5mm
Panasonic P80 Plasma consumables holder
An attempt to mount 3d Touch Sensor to the Zonestar P802Q (steel) carriage. V1 is light version with single bolt fastening. A part of the sensor's PCB is not protected. V2 with a more massive mount on two bolts and full PCB protection.…
This is a redo of my original x-tensioner so I could replace the idler bearing with a geared bearing to reduce belt vibration. This uses the same 5mm hardware that came with my printer. This is made to use a GT2 20 teeth idler pulley with…
This is something I did to have a gen4 style release button in a gen3 frame, The spring slot is a gen3 design with the size of the gen4 button on the outside. I printed one cut down just to mark the frame and two at slightly different…
This is a revision of my Right Hand X Axis extruder mounts for the Zonestar P802QR2 ( https://www.thingiverse.com/thing:3065295 ) that includes a Tensioner assembly for the X Axis drive belt. The Thing utilizes the existing bearing and…
Hi, this is the parts for the p802n Category: 3D Printer Parts
When the extruder is mounted on the left side, the lever interferes with the x motor at the top of the print range. This plate shifts it away just enough. Print instructions Category: 3D Printer Parts Print Settings Rafts: No Supports: No…
Mini RP8000 speakers klipsch
Dec 20 2018 Update filclip1 made a bit stronger..at the hook . ( its reversible if you put it on the inside of the spool so it doesn't interfere with the x carriage near the top.. Added custom z couple. ( no stretch to help with z wobble)…
All files are on github : https://github.com/crazytiti/Repetier0.92.9-DMY3DP This is preconfigurated repetier firmware 0.92.9 with auto level for DMY3DP-001 3d printer (anet a8 clone with modified melzi electronics) It use the bed sensor…
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
DO NOT USE WHEN NOZZLES\HEATER BLOCKS ARE HOT! Description: Zonestar P802QR2 Nozzle Allignment Jig. The jig is an aid to aligning the two hot ends relative to each other. There may be some additional levelling required when levelling…
Zonestar P802QR2 Y Axis Belt Tensioner 1.The unit is made up of 3 parts, a main body, tensioner and facia plate\washer. 2.You will require 4 x M3 x 20 mm long bolts with nuts (the nuts and bolts provided with the original kit work fine)…
I needed an easy way to mount the e3d v6 clone I purchased for my p802e so I made this. I used this cooling fan adapter https://www.thingiverse.com/thing:506958 , however the blue one that comes with the e3d v6 might also work but is…
What this? My attempt to fix a few issues with Zonestar P802Q printer (Prusa i3 clone). Includes X motor, cooling fun mount and bit more to fix a problems with XY axis parts. Designed to increase rigidity and a few bug fixes for the…
Zonestar P802Q series is a 3d printer that is one of "clones" of Prusa i3 with stainless frame. The stainless bracket of z-axes of those printers' fixes only the stepper motors but the z linear shafts are in holes drilled on the brackets.…
Mount Plate for 2 MOSFET RAMPS for TronXY P802 series REPRAP 3D printer. For use with MOSFET Mounting holes 62.8mm x 37.8mm apart for 3mm screw Link to MOSFET board on ebay:…
RepRap LCD backplate for Tronxy P802MA. It can be mounted just on the right side, it should be fine, becouse that's where the button is. Also check if your cables are long enough. Category: 3D Printer Parts
Z Axis Anti-Rotation Packer\Wedge for the Zonestar P802QR2 Wow, that's a mouthful. Basically due to the design of the stepper motor mounting tab when tension is applied to the X axis drive belt the Z axis stepper motor rotates off the…
2x5 Cell Holder for lP801437 3.7V ( 801437 ) 400mAh battery commonly found in onetime vape (e-cig). Friction fit
This is the valve that sits on top of the valve cover on a 2.5 tdi powered volvo V70 / S70 P80 , maybe P2 and possibly S80, that connects it to the intake pipe, before the turbo. It's the mirror of the CCV valve from a 1.9 TDI ALH,…
Thanks to KayIOA for this. His works on the Tronxy. I modded it to fit the stainless steel Zonestar to mount where the 2004 5 button LCD was mounted. The other parts such as the cover and a button can be found on his link, the Remix…
I modified the corner bracket of pheneeny's AM8 to be able to mount the extruder like it was mounted on my Tronxy p802e. After a year of loading filament into it, i didn't want to change my technique, lol. Enjoy! Category: 3D Printer…
Remix of the Heatbed Cable Holder for the Anet A8. Print Settings Printer: P802M Rafts: No Supports: Yes Resolution: 0,15 Infill: 30% Category: 3D Printer Parts
Remix from remix from remix.... To match my DMYCO DMY3DP-001 (P802M clone) So : wider hole for belt and bearing hole for rods because i keep the original left motor holder use M3 nuts for tighteners Be aware of the thinner guide, try not…
To be used when either your panel, or dashboard, or both sides have died. Ifit's the dashboard side, you'll have to dremel / file the remains of the screw hole flat. Included are versions that require an m3 insert and one that does not.…
Simple thing to provide cables hoops above the motherboard to help tidy the various cables running vertically up the frame. Category: 3D Printer Parts
I upgraded to an E3D V6 and made this mount and part cooling duct for it. I've been using this design for several months now. The only thing that is relatively new is my using of printed bushings and the bushing holders I made. The part…
I remade the stock blower fan nozzle for the p802 because mine was in rough shape and i wanted a color change. I used supports for the duct but you might not have to. Should be printed on its side so you wont need any external supports.…
Remix of the Light Bracket for the Prusa i3. Should fit on Zonestar P802 -M and other types like the Anet A8 I will develop an own case which holds two or more of this light modules. This might take some Time until i got the modules from…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
2x5 Cell Holder for lP801437 3.7V ( 801437 ) 400mAh battery commonly found in onetime vape (e-cig). Friction fit printed with 0.2 mm profile speed on MK4s
Jebao / Jecod GMP & DMP Dry-Side Support and Catch Cradle A free, printable support for the external motor of Jebao/Jecod GMP and DMP wavemakers. It supports the motor during normal operation and provides a built-in cradle to catch it if…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
For those who are more interested in accuracy than rate of fire, this is a single shot loader for the PP800. Its generally considered that Single Shot Loaders give a much better, repeatable accuracy due to the fact that the pellet is…
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: No Resolution: 0.2 Infill: 20% Gyroid Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s en vitesse d'impression et 20mm/s pour les parois
Print Settings Printer: Tronxy/Zonestar p802m Rafts: No Supports: Yes Resolution: 0.1 Infill: 100% Filament brand: Smartfil Filament color: Natural Filament material: PLA Notes: 30 mm/s d'impression et 20 mm/s pour les parois
tpu, 90-100% infill. comparison with original in photos
Allows you to hang a Blackview MP80 Mini-PC on an IKEA Skadis pegboard. Use two M3 screws to attach the mount to the back of the PC (the holes are already there), and voila. I might have gone a little overboard with the pegs, but doesn't…
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
I created this model after dropping the catch cup from the grinder's somewhat shallow forks. It doesn't take much for it to fall off. The model is pretty simple, and is made to slide off and on easily for cleaning. I found this this fit…
Extended the mount to allow room for my cooling fan. Update: split the model to make it easier to print, then it can be glued together for use. Category: 3D Printer Parts
Replacement part I made for Tronxy p802e extruder plate copying the dimensions from the original. Hasn't been tested yet, but if you make one post a pic and let me know how it works! Category: 3D Printer Parts
The fronts of the P80 are the same as a P2, so you can use my P2 Front suspension spacer or an XC70 strut for -2.25" or so of lift-over stock. Use this in the rear spring perch to gain extra clearance UNTESTED DESIGN I used some…
