Volvo P80 Load Cover BEEFED Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BEEFED up End pieces to Panczel Design's repair kit. Printed in PETG 30% infill and 4 walls.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 349
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Old design broke at 20% infill+4 walls in PETG, BEEFED up the design and upped to 30% infill. Still had problems with the design and the load cover was slugghish on return, V3 shortened the BEEFED tube to avoid any problems with the internal springs, and made the plate part a little thinner to alleviate the sides pushing in and putting pressure on the rod and possibly bending it slightly. Again, Should hold now, if not, metal print next. (mainly because the outside plate is getting so thin now that unless it gets any extra strength from different techniques, metal printing will be the next cheapest option. or finding a metal tube, cutting a slot in the tube, and tac welding a thin 1mm plate to the tube.