Leveling and Adhesion Test print - Scalable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created to test my levelling after a few adhesion and stringing issues. Allows you to define the levelling integrity.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey!
I've been having some adhesion and levelling issues with my print bed and so I created this that shows me where on the print bed I have issues.
A bit of trial and error, change settings in those locations and I was back to printing normally in no time.
The model has small bevels around the edges for additional testing which I found useful.
Designed to fit on my bed at 200x200mm, with 1.5mm height. (Ender 3 V3 SE)
- PLA
- Printed on 0.2 layer height
- Infill density at 30%
- Shell at 0.8
- No supports
I've uploaded pictures from my test prints to demonstrate how it works.
If you need a large size, just scale it up - it's square by nature so should be able to fit most beds/plates.