Magnetic Twist Lock PTFE Couplers / Joiners / Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking to connect two pieces of PTFE guide tube or adapt a larger tube to smaller tube? These mag couplers are the way!
- Ocena
- 5 / 5
- Polubienia
- 12
- Wydruki
- 1
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
Quick and reliable prints for coupling two pieces of PTFE of either the same or different dimensions. Versions for 6mm or 4mm OD tube included. Requires 12x3mm magnets with 4mm interior hole and molded retainer clips.
Non Printable Parts Used:
- Magnets: https://a.co/d/8HRG9Yf
- 6mm Collet Clip: https://a.co/d/dWJNqY8
- 4mm Collet Clips: https://a.co/d/8BPRg95
Included 3MF files that show where to pause to drop in the magnet and then resume the print.
Magnets make it quick and easy to disconnect and deal with loading and unloading filament over having to detach the collet clips.
7/14/24 Updated: Made them so they can twist lock together for greater connection strength or you can use them without the magnets completely if you like.