Magnetic Twist Lock PTFE Couplers / Joiners / Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.29 – €0.36 net (excluding VAT)
For file: 6MMPTFE_MagTwistLoc_v3_0.4n_0.15mm_PLA_MK4IS_23m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 22.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Looking to connect two pieces of PTFE guide tube or adapt a larger tube to smaller tube? These mag couplers are the way!
- Rating
- 5 / 5
- Likes
- 12
- Makes
- 1
- Views
- 630
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
Quick and reliable prints for coupling two pieces of PTFE of either the same or different dimensions. Versions for 6mm or 4mm OD tube included. Requires 12x3mm magnets with 4mm interior hole and molded retainer clips.
Non Printable Parts Used:
- Magnets: https://a.co/d/8HRG9Yf
- 6mm Collet Clip: https://a.co/d/dWJNqY8
- 4mm Collet Clips: https://a.co/d/8BPRg95
Included 3MF files that show where to pause to drop in the magnet and then resume the print.
Magnets make it quick and easy to disconnect and deal with loading and unloading filament over having to detach the collet clips.
7/14/24 Updated: Made them so they can twist lock together for greater connection strength or you can use them without the magnets completely if you like.