1 / 4
ERCF_V2_40tooth_metal_gear
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I wanted to use a metal gear for my 40 tooth mod and realized that the gearbox needed to be changed to accommodate the larger hub. I remixed the gearbox from the ERCF V2 repo and opened up the space for the hub and made some adjustments to close the holes that that created. I also split the dome off the 40t gear from Grafton 1046's 40t mod and gave it a key to fit on the d-cut shaft and not just spin.
Just a note: it is a reprint of both pieces. I had to make adjustments to both the front and back.
You'll also need the NEMA 17 mount from here
The pulleys I used can be found here
- Make sure you get the 5mm bore
- NOT an affiliate link