1 / 6
Mini Priming Stick - Bottle Cap Threads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Make arranging your minis for priming easy with these bottle cap threads. They attach to a piece of wood with a screw through the center, or to most other materials with the right adhesive.
To use, attach your minis to bottle caps (Coke-style) with poster putty or double sided tape, and screw them onto the threads. Then spray away!
Minis on bottle caps can also be used with a variety of holders such as Game Envy's "Hobby Holder", or several 3D printable holders on Printables.
Center hole is designed to fit a 1 inch #8 wood screw, since that's what I had on hand.
Printed at 0.2mm with no supports.