1 / 6
Desk Fan Inlet Duct & Stand for 120mm PC Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inlet duct to be used with a 120mm PC fan. The duct funnels air to the fan inlet, quiets noise, and angles the fan up.
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 468
- Wydruki
- 3
- Wyświetlenia
- 2802
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (116)Powiązane
The duct is designed for the fan to elegantly sit on a desk without the need for any additional mounting structure. The fan is angled upward at 22.5 degrees to aim airflow your chest. The fan mounts to the duct with M4 screws, 30-34mm long, the threads are printed directly in the duct. I used a Noctua AA1 outlet (also available on Printables), but you can use any outlet.
