92 mm Fan Duct to 10 x 90 mm Output and 60 mm Height
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct designed to adapt a 92 mm fan into a dust blower. The design reduces the output dimensions significantly,…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 578
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Duct designed to adapt a 92 mm fan into a dust blower.
The design reduces the output dimensions significantly, theoretically leading to faster air speed and focused air flow. It requires a powerful fan with high static pressure, such as the Vantec Tornado (12V, 1A, spins at 4800 RPM) or similar.
The input is 92 x 92 mm and the output is roughly 10 x 90 mm at a 60 mm height.
Printed in white ABS at 0.25 mm layer height and without supports. The overhangs are not angled enough to require supports
Designed in Fusion 360.
Print Settings
Printer:
Metamáquina 2
Rafts:
Yes
No
Resolution:
0.25
50%
Filament: Filamentos 3D Brasil ABS White
Category: DIY