BTT Eddy mount for Ender 3 V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the BTT Eddy probe that fits on the Ender 3 V2. It's compatible with basically every toolhead.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 215
- Wydruki
- 0
- Wyświetlenia
- 1460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This mount is designed to be mounted onto the BL/CRtouch mounting holes. That's why it's compatible with basically any toolhead, original and custom.
You need 2x M3 screws (5 to 15mm long is fine) to fit the mount on the X axis carriage.
You also need 2x M3x22 (or longer) screws and 2 M3 nuts to fit the Eddy probe on this printed mount.
The probe offsets in Klipper for this mount are:
x_offset: -50
y_offset: -8
I am also including the STEP files, so you can adjust this according to your needs.