1 / 3
Print in place binoculars lens cover 50mm (PETG - No flexible filament required)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place lens cover for Vanguard ED 10x50 binoculars. 50mm (PETG - No flexible filament required)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Print in place lens cover for Vanguard ED 10x50 binoculars.
Should probably work with other ~50mm binoculars.
No flexible filament required.
Print with PETG (tested with Prusa PETG) and use at least 5 perimeters to keep the hinge robust. PETG is flexible enough to work as a reliable hinge.
Make sure you print it with 0.3mm layer height for best hinge results.
Should be printed in place without supports.