1 / 3
180mm to 140mm Fan Adapter - Fractal Mood
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to fit a 140x25mm fan in place of the 180x38mm Fractal fan
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
An adapter to replace the Fractal Design 180mm fan with a 140x25mm fan. Comes with 25mm spacers so the original screws for the 180mm fan can be used. The height of the adapter itself is 13mm so the fan's height is the same as the 180mm.
No supports are required if printed with the 140mm fan side on the build plate.
I made this so I could use my quieter Noctua fan. It can't move as much air as the huge 180x38mm fan, but that's only at full speed which I never got up to anyway.