CMF Nothing Phone 1 Horizontal Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attachable stand designed for the CMF Nothing Phone 1
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 1646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A portable horizontal stand that can easily attach to the back of the CMF Nothing Phone 1. Has holes for large screw as well as smaller screw for stability. The bracket should be printed in a rigid, durable material, but the legs should be printed in TPU, preferrably 95A or higher. Use supports when printing both the legs and the bracket.
Assembly: Bend the TPU parts and insert the pegs on either side into the holes on the side of the bracket. Once both legs are secure in the bracket, remove the large screw from the back of the phone and screw in the bracket. If the bracket seems unstable, remove the smaller screw on the side of the phone and use it to attach the other side of the bracket. You may need to move one of the TPU legs to reinsert the screw.