Ncase M2 Fan Mount 140mm 120mm with modular GPU support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ncase M2 fan mount with a version for 120mm and 140mm fans
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 431
- Wydruki
- 2
- Wyświetlenia
- 3615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fan mount for the Ncase M2 (inverted layout)
There are two different designs available:
- ITX (recommended): The fan cutout is not shifted. This allows an easier routing of the GPU power cables.
- MATX: The fan cutout is shifted towards the middle of the case. This is due to the PSU placement in the front, which partly blocks the fan.
Both designs are available for 120mm and 140mm fans (separate files) and both support fullsize fans (MATX up to 28mm thickness).
It's also possible to install the ITX version in a MATX build. But beaware that the airflow might be restricted by the PSU.
This model consists of three parts:
- The fan mount itself
- Optional: A bracket for stabilization. This is meant for builds without bottom fans (e.g. builds in inverted layout)
- Optional: GPU support for stabilization of the GPU (anti-sag).
The fan mount and the bracket can simply be plugged together and glued if required. The bracket is simply clicked into the bottom panel of the case. The fan mount uses the stock mounting holes of the M2.
A GPU support can be installed on the inner mounting holes of the used fan (use fan screws). It is advised to take both side panels of for fitting.
The pictured build is using the MATX version of the fan mount with a Artic P14Max.
Printing in PETG, ASA or ABS is recommended.