NasHole (A Small Form Factor SFF NAS / PC case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The NAShole case is a 6-bay ITX case designed for printing on the Bambu A1 printer or similar-sized printers. (250X250)
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 345
- Wydruki
- 3
- Wyświetlenia
- 4256
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
The NAShole case is a 6-bay ITX case designed for printing on the Bambu A1 printer or similar-sized printers. It also accommodates a single-slot PCIe card, such as a SATA to UEFI adapter or a NAS card.
Features:
The Nashole case is fully 3d printable, only requiring seven separate parts.
Capacity for up to six 3.5" hard drives and one 2.5" solid state drive.
Requirements for assembly:
1x Mini ITX motherboard (Plus Processor and Ram of your choice)
1x SFX PSU (Power supply)
6x: 3.5" HDDs.
1x: 2.5" SDD or nvme if your motherboard supports it.
1 or 2: 120mm fan (You don't have to use a noctua, but it is nice.)
1x: 6 in 1 sata power
6x: sata cables
M3x8mm 10.9 Carbon Steel Countersunk Head Hex Socket Screws
--------------------------------------------------------------------------------------------------------------------------------
(These three use the same set of parts. Just buy one.)
4x: m3 6+4 motherboard standoffs
4 – 8x: m5*10 fan screws
4x: m3 5*5 case screws for power supply.
--------------------------------------------------------------------------------------------------------------------------------
[Optional] Only get this if your motherboard does not have seven sata ports.
[ Printing Instructions]
- The parts “front_pt1 and front_pt2” need to be loaded into your slicer at the same time.
When the slicer opens, it will ask if you would like to “Load these objects as a single object with multiple parts” Click “yes”
Click the “Objects” button (it's beside the “Process” button.)
Click the “Part Studio 1 - Front_pt2” button.
Navigate to “Strength”
Set the Top Shell Layers to 0
Set the Bottom Shell Layers to 0
Change the Sparce infill pattern to Rectilinear (Or whatever you would like really)
Set the Infill Percentage to whatever you would like. (I used 15%)
Slice
- For the other parts:
Ensure that tree supports are set to auto for both the “Fan_Box” and the “Main Body” - Print with petg or better.