Creality K1 Very TALL Lid cover adapter/Raiser, (for big extruders)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your extruder is on the top of the head
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
If you have installed a different extruder instead of the original one and it is taller ( For example, if you have used Extruder adapter) - then you might want to have that model for keep using the top lid cover, because there is no other model that allows you to raise up your cover that high Enough.
It also wider than any other model I was able to find here on our favorite Printables website, so it is totally suitable to any kind of extruders you might have inside of your printer.
Works good with Orbiter2.0, HGX-LITE (on my photos), Bondtech LGX, and others.
The instructions as follows:
- Simply cut the model in 1/2 twice on your slicer DOVETAIL type cut. (Bigger connection surface works better.)
- Print and Enjoy.