1 / 1
Nissan Almera N15 Antenna Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you remove the old antenna from your nissan you can use this cap to cover the hole.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Use the original rubber sealing to screw the cover back on.
Removal of the antenna: Remove the two screws. Gently pull out the antenna about 3-5cm. Remove the plug on the bottom of the plastic part. Now use a little more force and pull the whole antenna out. It is around 2 meters long. Remove the rubber from the plastic of the antenna and put it on the 3d printed part. Screw the cover in the original place.