1 / 8
On Off Rocker Switch Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A housing designed for external mounting of an On-Off switch on a V-slot rail or any flat surface.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This housing is designed to fit the rocker switch shown in the image, which can be found on Amazon and other retailers. It also accommodates other switches as long as they fit.
This housing is ideal for controlling devices like a cooling fan and is specifically designed to fit well on 20x20 mm aluminum extrusions (V-slot rails). The hole diameter is 12.5 mm
Suggested Print Setting:
- Material: PETG
- Infill: 100%
- Supports: Required for the base plate holes.
Assembly Instructions:
- Mount the base plate: Secure the base plate onto a suitable surface.
- Slide the housing: Slide the housing onto the mounted base plate.
- Cable management:
- If mounting on a rail, use a drop-in nut. The cable can be routed directly into the rail, hiding it neatly.
- Remember to pass the cable through the base plate before mounting for easier assembly.
- For flat surface mounting, cut the end of the base plate to allow the cables to exit.
Options:
- Option A - Small: A minimalist design without an “on-off” metal sign for a compact setup.
- Option B - Large: A slightly larger housing to accommodate the "on-off" sign on the front.
Both options are available in two versions:
- Clean: A smooth surface finish.
- Textured: Featuring a hexagonal pattern for added grip and aesthetics.