1 / 10
SMART HANGER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 in 1, print-in-place hanger
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 102
- Wydruki
- 3
- Wyświetlenia
- 860
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (61)Powiązane
FEATURES
- Hanging Stuff (~15kg)
- Whistle (+120db)
- Bottle Cap Opener
- Easy Knot (2 steps)
- Tick Remover
HOW TO DO “EASY KNOT”
- Make sure the rope has at least 6cm of free end
- Make a lose loop around the hanger's head
- Pass the rope through the holes of the head
- Pull the hanger while holding the end of the rope
DESIGN
- Dimensions: 65x110x10mm
- Hole Diameters: 4,5mm
- Sharp edges: only in tick remover
- Tested Load: 16kg (no deformation)
- Whistle: two staged (low and high pressure)
- Floating on water: Yes (except with +80% infill)
PRINT SETTINGS
- Materials: PLA/ABS/ASA/PETG
- Colors: Orange/Red/Yellow/Glow
- Nozzle: 0.4mm
- Infill: +50%
- Walls: +2
- Top/Bottom layers: +3
- Supports: NO
- Brims: NO
- Scale Up/Down: NO
- Seam Placement:
SUGGESTIONS
- Please comment your feedback. We can improve it.
- Test your infill with the load you need before camping.
- You may tie it on your backpack, it is the best way to carry it.
- If you use PLA, do not expose it to sunlight for a long time.
- It is better to use “glow-in-dark” materials.
- It is originally designed for hanging stuff inside the tent or hanging backpacks to branches