MT-SYSTEM tool wall adaptors (like BOTT etc.) for 40x20 profiles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MT-SYSTEM tool wall adaptors (like BOTT etc.) for 40x20 profiles
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We made these little helpers for easy mounting of 40x20mm aluminium construction profiles to tool wall systems with (9,7x9,7mm) SQUARE holes as made by
- BOTT
- CONTORION
- KAPPES
- KRAFTWERK
- ROCHOLZ
- VIGOR
- and many others
There are TWO versions available:
- Adaptor for the END of the profiles
- Push-through adaptor for stabilising longer profiles as shown on the pics.
Just stick the profile into the holder and optionally secure it with a 4mm screw from top and/or below. Than place it on your tool wall as shown on the pictures and mount any MT-SYSTEM box/tray/cabinet you like!
The 40x20mm profiles can carry ALL components of our…
MT-SYSTEM - What is it all about?
HERE you can find ALL MODELS of the MT-SYSTEM we have launched so far.
We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. If you miss anything please let us know. We are always comitted to extend the system. Thanks.
Have fun!
Material: PETG
Layerheight: 0.2mm
Infill: 30%