MT-SYSTEM tool wall adaptors (like BOTT etc.) for 40x20 profiles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MT-SYSTEM tool wall adaptors (like BOTT etc.) for 40x20 profiles
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 37
- Makes
- 0
- Views
- 1,384
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We made these little helpers for easy mounting of 40x20mm aluminium construction profiles to tool wall systems with (9,7x9,7mm) SQUARE holes as made by
- BOTT
- CONTORION
- KAPPES
- KRAFTWERK
- ROCHOLZ
- VIGOR
- and many others
There are TWO versions available:
- Adaptor for the END of the profiles
- Push-through adaptor for stabilising longer profiles as shown on the pics.
Just stick the profile into the holder and optionally secure it with a 4mm screw from top and/or below. Than place it on your tool wall as shown on the pictures and mount any MT-SYSTEM box/tray/cabinet you like!
The 40x20mm profiles can carry ALL components of our…
MT-SYSTEM - What is it all about?
HERE you can find ALL MODELS of the MT-SYSTEM we have launched so far.
We from MAKERTEAM® developed our own solutions for individual workshop installation for EVERYBODY & EVERYWHERE based on simple aluminium carrier profiles. The MT-SYSTEM consists of whole bunch of useful ideas like trays, inlays, hooks, holders and many more. Here on Printables we offer a lot of stuff for free so have a look and pic YOUR individual endowment. If you miss anything please let us know. We are always comitted to extend the system. Thanks.
Have fun!
Material: PETG
Layerheight: 0.2mm
Infill: 30%