12,496 models
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
Update 1 - 17th October 2023: Thanks for the feedback and the great prints everybody! :) As expected some printers have troubles with connecting two stacks together, especially when they are not calibrated enough. I added a small chamber…
Introduction Wasn't happy with the selection of water spikes out there so decided to create my own to fit whatever needs you may have! And while you're at it why not have it double as a plant label! This spike can be printed in as little…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The width is defined by spacers which are put under the blade. The PET strip can be then used in machine which converts it to filament for 3D…
Octopus Wine Bottle Holder 1 Color AMS, MMU or, ACE Pro PLA Basic Purple Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership Special Thanks to PCBWay! This project is…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…
Remix of the snowy owl Hedwig by Peter Farell with a flat bottom (for an easier print)
We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle? It can (almost always) be removed similar to the way it came in. Manual how to do this yourself is shared under […
Create your own PET filament from plástic bottles! You can find all the information, blueprints, instructions, and much more on my website: https://sites.google.com/view/ecodecat3d/home KIT For a much easier assembly, you can purchase the…
Another accessory to organize fridge and not only fridge storage. This fridge bottle holder designed with durability and minimum plastic usage in mind. There are 2 models - 2 or 3 bottles. Maximum bottle diameter: 90mm Height of the rack:…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…
The source marked this model as adult content.
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
Army Painter Speed Paint is a fantastic paint range that can save bundles of time in miniature painting. Their labels, though, do a poor job of truly showing what the paint will look like on the model. These toppers can be painted and…
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
Modeled in Blender for nice vase mode prints. The Nuka logo is nicely smoothed so perfect for single perimeter prints.
This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
A simple self-refilling water bowl for cats using a PET bottle. A 2-liter bottle would be ideal. Printed with Esun PLA+ with a 0.6mm nozzle, 2 walls, 4, top/bottom layers, 30% infill, NO supports. 2- liter bottle model is for reference…
Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the…
Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.
This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly. EDIT: There are 2…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
A practical 3-piece funnel set designed to screw directly onto standard PET bottles. 🔄 Each funnel connects using a built-in bottle thread — no slipping or holding required 📏 Available in three sizes: 77 mm , 112 mm , 147 mm 🧴 Ideal for…
Printed in PETG provides adequate flex for putting them on and off multiple times.
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
Update: Just uploaded “V3” Versions (slightly better looking, slightly better function) Backstory I was unsatisfied with most of the printable bottle cages because they usually only fit one specific bottle/can size and do not “grip”…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
Use a brim for adhesion. The full bottle is a 2-3 hour print at 0.2mm layer height . Should also scale well within your slicer if you want a different size. You could try printing the half-bottle face down rather than standing up although…
A generic lid/cap for bottles and jars. Can be configured to fit most containers. Allows for containers with multiple interleaved threads. NOTE : I've published an updated version of this called Parametric Screw-Top Lid .
Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…
All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger…
Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
This is a bottle spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for standard european bottles (PET and glass). The spout is fastened with a knurled…
A little rack for holding spray bottles in the garage. It's held to the wall with #8 screws. I printed it in PETG with no supports.
Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate. They are made for four groups of paint bottles: Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.…
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
This Bottle Cage is designed for 3D printing from ASA material, which is UV light stable, and then it is the best material for outdoor use. While printing, we recommended using the skirt in full high of the 3D model. The inner diameter…
I designed this universal bottle cap opener with a lever-based mechanism for easy opening of water bottle caps ranging from 27-35 mm in diameter . Use 3 perimeters + 30% infill. 🔹 Features: ✅ Ergonomic Lever Design: Uses a simple…
I saw this type of wine stand a few days ago but could only find it made of wood, so I decided to design my own. I printed several until I found one that fit most of the bottles I had, printed quickly, and was sturdy. I incorporated a…
Christmas 2022 Update I changed the corners of the picatinnies to radii so they would print better. Also I adjusted the angle of the infill in order to get ultra smooth glide surfaces for the slider. Have fun! Watch the Beer Bottle Gun in…
I don't have much storage space at my place and always hated how bulky traditional beer trays were, so when I got bored and thirsty at the same time the other day, I designed this compact minimalist version. It holds the bottles by…
Bottle holder for plastic bottles with 75mm diameter. Inspired by Nalgene 32oz Water Bottle Bike Holder by Dutch Goldblum Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No…
No brim or supports required. A reusable wasp trap attachment designed to screw directly onto a standard bottle like a regular bottle cap. The trap works by attracting wasps into the bottle using sweet bait such as juice, soda, syrup…
PETG plastic is better for printing the handle, as it will need to be unbent to slip the half rings through - I don't think you can do that with ABS, but I haven't tried it. Ver 1.3 update: - new handle size - now there are three of them:…
NO SUPPORT NEEDED Dragon Wine Bottle holder!!! I have 3 models listed, one with a raft for more support (if you are going to have it where it can be bumped) and one without plus one with a raft that looks like the dragon is laying in…
Bottom of the Sea Benchy have one on the mk4 printing should be done in a few hours. Seems kosher.
Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot
This beer bottle model was made by Revopoint POP. If you want to get more models like this, please try to use 3D scanner POP: https://bit.ly/3xb37c3 Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA…
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Best effort attempt at recreating an Owala water bottle model. I used the specs from the website and my own bottle. Updates: A huge thank you to everyone ( @Hondaman74_265897, @EmilyTaylor_3024203 , @Agne_2844318 , @Dieselmh_2984182 ) who…
Helps to amplify/redirect sound from phones with bottom-facing speakers. Edit: Updating dB stuff with new measurements and correct maths Increase is around 8-9dB for the intro to the song “Smokin'” by Boston played on my P20pro from…
Drawers mounted on the underside of Creality K1. It consists of a front drawer and a right-side drawer, and does not block the ventilation at the bottom.
The cap should fit any regular PET plastic bottle.
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The PET strip can be then used in machine which converts it to filament for 3D printers. This cutter is using sharpened bearings, they works like…
I remixed this awesome model of Patrick Star to turn it into a bottle opener using a €0,05 coin! Other coins might fit as well! Print the model Glue a 5c coin inside Get a beer and enjoy! Category: Kitchen & Dining
The appearance of a spilled bottle. Wine holder or support for a bottle of wine or other alcohol. a print with a print is needed.
Diameters; 45 mm 50 mm 58 mm 68 mm Printed with PLA, but PETG is recommended for heavy-duty storage.
A wide-mouthed pill packer bottle with threaded cap. Packers are often used for storing pills, capsules, supplements, powders, and other health-related products. This model uses a simple smooth shape for the outside so that you can…
Made a few changes to 3Deddy's Bottle Opener and Cap GUN! I had constant issues with making a knot in the rubber bands. It probably isn't a major deal for most but I just had too many issues making it work like I wanted so I removed the…
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…
Hi guys, I saw many users had problem printing the Awesome Bee Feeder by NicG so I thought why can't it be printed all in one go ? So I adjusted the model like this: single model no supports required everything just bridges nicely and is…
Weathered Rusty Nuka Cola Bottle Cap Make it into a keychain or a coaster. Good Candidate for Drybrush Technique.
I wanted to challenge myself to design a water bottle rack that could hold 12 water bottles and also be printed/assembled in less than 1 day. Note: pictured 32oz Nalgene only fits on top row Non-Printed Parts for each bottle x2 - 5/16"…
Change log: New version Added (BottleCap Design) 360°ɹǝuǝdo ǝlʇʇoq allows you to open your bottle in360 different directions! Printsettings: Nozzle: 0.4mm Layer: 0.2-0.3mm Infill: 25-35% Perimeters: 3 Bottom/Top layers: 3/3 Seethrough…
Original Coke Bottle by DalekSupreme This bottle have i done bigger. Support : NO
the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed
Bike holder for the 32oz Nalgene Waterbottle. Will also suit other bottles of a similar diameter (92mm). Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Notes: Printer…
Spray bottle holder for the Honeycomb Storage Wall. Printed in PETG at 0.2mm layer height. Supports only for between the honeycomb inserts (see last picture).
Strip PET Bottle cutter. Two width version: 8 and 10mm Four width version: 4, 6, 8 and 10mm Added custom request model with heights of 1,3,5,7,9mm Enjoy Print Settings Printer: FLSUN SR Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Convert any plastic water bottle into a watering cap or a portable dog shower. Fill your bottle with water, pull the portable outdoor shower lightly on the neck of the bottle, turn it over and press it together. Perfect for outdoor use.…
Mr. 4volt on Thingiverse spent a lot of time designing a fantastic bottle opener to be 3d printed. I took some measurements of his design and made my own. Mr. 4volt deserves credit for this awesome, effective design. This object should be…
This foamer uses the Venturi effect as an injection method, no pressurized systems Gardena-compatible hose connector Interchangeable screw-on nozzles: spray, jet, foam, and fan(only the foam nozzle works at high pressure with the…
This reusable stopper will keep insects and sand outside your bottle, while keeping most of the drink inside. It works with opened bottlecap bottles - and can be printed in PLA! Stoppers come off with a satysfying pop, while the loop…
This ergonomic bottle opener is designed to easily twist off caps ranging from approximately 26mm to 34mm in diameter . Ideal for people with reduced hand strength, such as seniors or children, it features a well-shaped handle that offers…
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Reccomended model: Medium Flow Try printing in TPU/PEBA or other flexible filament for a good seal, otherwise, I cut a small gasket out of paper which worked well. I have also included a Gasket model which can be printed out of flexibles…
Ein kleiner Helfer, um widerspenstige PET-Flaschen leicht öffnen zu können. Kompatibel zum verbreiteten PCO 28 Standard (Wasser, Cola, Limonade, Säfte). Die Verschlussaufnahme verläuft leicht konisch, so dass auch leicht abweichende…
