Liczymy pasujące modele…
Quick Release Plate Spare Part Is plastic enough for your expensive camera? Well, a metal plate certainly is unbeatable. But my PLA print never failed! For studio and indoor it does the job! You will need a round rubber band to fit the…
Wydruk około 1,19 €–1,45 € nettoWstępna wycena jednego wariantu
This light diffuser fits on a Godox v860II flashlight. It's very easy to use and prints in vase mode. If you don't have the same flashlight, you can use the provided Fusion 360 file and replace the profile of your gear. It doesn't need to…
Wydruk około 1,99 €–2,43 € nettoWstępna wycena jednego wariantu
Every infill type has been tested by the kids! Octagram Spiral, Archimedean Cords and Concentric are clearly their favourites :-) Infill patters used: Rectilienar Aligned Rectilinear Grid Triangles Stars Cubic Concentric Honeycomb 3D…
Wydruk około 3,24 €–3,95 € nettoWstępna wycena jednego wariantu
Simple benchdog flush plug, best printed in vase mode. Non vase mode model:
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Various Brio train tracks and switches Lots of track study and design for the joy of the kids :-) Thought I'd make it publicly available to play with. Let me know if you need another one, a combination, a female only track and so on! If…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
Easy to use print stoppers These drill stoppers come as a paired collet and a nut. They are simply screwed onto the drill bit to the desired drill depth. No tool needed. The collet is kept small and doesn't mask the ongoing drilling.…
This end piece clips very easily on Makita saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. Faced down. No supports. Here’s the Festool saw track bumper:…
This end piece clips easily on Festool saw tracks. The bumpers can be clipped on one another for storage. Print instructions: PLA 0.3 mm layer height. No supports. Update 20230623: Small modification on the splinter guard side (removed…
Arched Brio ramp, in addition to my Brio collection. https://www.printables.com/model/279651-brio-brio-brio-more-than-20-rails-and-switches You can print it without top and bottom layers. I've sliced mine into 2 parts – have a look at the…
Micro SD Card Wallet Holds 16 Micro SDs and 1 standard SD card. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 58 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not…
Little helper to unlock the crank arm cap off Shimano Hollowtech II cranks. The thumb screw is optional. Fits a 6mm allen key or a 16 mm wrench. Printed with PLA, 0.3 mm layer height.
This little helper is often made from aluminium or quickly done with wood. However, I printed a bunch of them to be used with small clamps. Two sizes: 123x123 mm and 79x123 mm Print settings: No fill and no top and bottom layers, only…
Repeatable rips with the Makita track saw This jig makes it easy to cut precise strips of exactly the same width when panel cutting. Two side fences are mounted on the guide rail. The required dimension is set with the adjustable stops.…
Accurate replacement for the original tapo base. Print with PETG, 0.3 mm layer height. Some sanding may be required on both pegs to get a perfect fit. Update 20240218 (9): Added a groove to insert a ø 1mm metal wire. The wire needs to be…
This is a new model of my previous Fujifilm X rear lens cap. There are two versions, both print in roughly an hour. two walls, like the original, somewhat flexible, and solid body Recommended print settings: PETG filament, 0.2 mm layer…
These drill stoppers come as a paired collet and a nut. They are simply screwed onto the drill bit to the desired drill depth. This is a set for bigger diameters: mm Ø6.5 Ø7 Ø7.5 Ø8 Ø8.5 Ø9 Ø9.5 Ø10 Ø10.5 Ø11 Ø12 Ø12.5 Ø13 PETG with a…
This is a very basic pillar for Brio train tracks. You can print it without any top and bottom layer and play around with your favourite infill patterns :-) PLA 0.3 mm layer height 2 perimeters In addition to this collection:…
This mount fits one Apple Airtag under the saddle directly over the clamp. Printed with black filament the device is hardly visible. Assembly: 2x M3x16 socket head screw, 2x M3 square nut. Saddle rails: c-c 43 mm, ø 7 mm This model is…
Two part omega shaped pipe mount. Needs two wood screws, Ø3 mm. PLA works fine, 0.3 mm layer height and no supports. Update 20240118: Added 7 diameters (v3). C1 & C2 ø25/ø32/ø40/ø50/ø60/ø75/ø90
Round corner template to be used with a handheld router or at the router table. The template sits flush within the handle. Printing recommandations: 0.2 mm layer height with PLA or PETG. Print the handle upside down. No supports needed.…
This little bumper helps protecting the aluminum rail of Festool MFT tables. Easy print with no supports, 0.3 mm layer height, 0.4 or 0.6 mm extruder. Update 20231201: Still a WIP Update 20231204: Reduced the tolerance settings…
This hose holder keeps the vacuum hose in place, like a third hand. Fits standard MF table holes of ø19 or ø20 mm. You will need a 20 mm velcro strap. Prints in two parts, to be glued together. PLA works fine, 0.3 mm layer height.
Fully 3D printed table saw sled for the mini Proxxon KS 230. Parts: Sled Runner Guide Nut Railnut Lever Stop Fasteners (not 3D printed :-) 1x M3x20 socket head (fully threaded) 1x M4x25 socket head 2x M3 hex nut 1x M4 hex locknut The…
Simple holster with a pocket fitting a ø20x5 mm magnet to store the Build Plate Cleaner by @kstudioca_1569715. Top and bottom layers are not strictly necessary. Check out my short and longer magnetic knobs here .
Easy to print tube with secure screw on cap. Print with black PETG.
Just a knob with an inlaid magnet to store the Build Plate Cleaner by @kstudioca_1569715 against a metallic wall or the printer enclosure. Neodym magnet: ø10x5 mm Update 20240401: Increased tolerance settings for the thread…
Phone Stand (another but mini) This is a very simple phone stand, mainly for landscape mode orientation. It works with different iPhones and various Android phones. Dimensions: 30 x 36 x 40 mm, groove 11 mm. Printing: No supports, 0.3 mm…
A better scraper it is. Why would so many makers print a scraper? There’s my slim version! Don't you ever touch your print bed! ;-)
Update 20230603: New model available: https://www.printables.com/model/497503-new-fuji-x-rear-lens-cap
This jig is intended to be used with other corner squares and needs 3 claws or clamps. https://www.printables.com/model/279139-corner-square-for-woodworking/comments Added a refined design based on a square grid.
Refinement of @danny243 's marking gauge (himself inspired by zisoft ). A M3 heat insert is used instead of a nut. Update 20230120: Some minor tweaks to the tolerance settings (v11). Tested a heat set insert with success. I recommend to…
A simple knob for the extended router base: https://www.printables.com/model/379774-extended-base-plate-for-makita-router-rt0700 Fits a M4 nut and a M4x40 countersunk screw. PLA works fine, layer height of 0.2 to 0.3 mm.
This is a 60 mm two parts eastern egg. It’s a nice shuttle to hide or gift little gadgets or sweets. It needs a small support for each tip. Check the 3fm for the print settings. PLA, 0.15-0.3 mm variable layer height. Two perimeters work…
80 mm long adapter for ø31.5 vacuum hose nozzle. PLA, layer height 0.3 mm, no supports. Check out this new model and the nozzle collection:
This is a handy caddy for pens and pencils. It prints in two parts without supports. The handle slides into the container's ribs. A dab of super glue will do. Dimensions: 156x156 mm, height ~133 mm
I needed a handy platform pedal to clip on my Speedplay pedals. I wanted a small pair of platforms I could use for a short ride and then stove them into my pockets. The whole design process went through several different models. I have…
Another bumper for your Milwaukee track saw guides. It’s the Milwaukee logo on a standard Festool bumper. The Milwaukee logotype is quite inclined, therefore it's been scaled to fit. It may be too small to print. I have not tested any…
120x120 mm softbox for a Godox v860II flashlight. The design comes in three parts: the box, the frame and the diffuser. You can use a tissue (Kleenex), a white nylon fabric, one or two layers of tracing paper, white baking paper works…
Since unauthorized copies of this model are being sold on temu and amazon, it has been withdrawn as a free model. It will be available in my shop and free for club members as soon as possible. Thank you for your understanding and support!…
Double projected letters which can be read twice – from the right and from the left point of view. Nice touch for a present. As initials they can be used for table decorations. Some letter combinations can be printed right away. Others,…
This remix fixes the narrow blade. The blade fits the original design by @RestoreDoctor. Works way way better ! :-) Tested with PLA, variable layer heights and no supports. Update 20230707: Refined overall shape and one less tooth on each…
One Print Assembly Punching Ball (fits on your desk) This spring mounted punching ball loves to be kicked and slapped. Train your left on this ball to ultimately beat the Bobbleheads :-) It's strong – are you? If so, it is recommended to…
Still a WIP. This is a preview of the parallel guide that will be published soon. Check back soon!
Little tool with great effect. It's not anodised in red but PLA or PETG works fine. Dimensions: 182x38x25.4 mm
This is a ready made Fusion 360 file to quickly print the required thumb screw. Open the “PARAMETERS” window to choose the M3, M4, M5 or M6 screw size. If you wish you can further dive into the parameters to fit your goal. Update 20230307…
Fully parametric Fusion 360 model. The provided STL files are intended to be printed with a 0.4 mm nozzle and 0.3 mm layer height. Edit 20240628 Finally added the fusion file.
GoPros are waterproof but you still need to protect their lens. Print instructions: Soft PLA, layer height 0.2 mm Don't use normal PLA or PETG, it will scratch your camera. You can also use TPU if you dare :-)
This gauge fits on the classic metal ruler (profile of 13x0.5 mm). It fits snuggly while it can be adjusted with reasonable force. I use a nice brasse M3 hex spacer and a M3 nut. No rounding or chamfering has been applied to the model to…
Classic cone shaped canopy. A M6x10 mm polyamid flat headless screw is needed to clamp the canopy to the cable. To cut the thread I’ve been using a thread cutter or simply a new M6 screw. PLA, 0.3 mm with variable layer heights. Print…
The Wobbling Prusa Pug Buddy Lots of tests to get buddy wobblying! But the pack belongs to the family now :-) Printing with PLA with a layer height of 0.2mm should work fine. A flat screw driver will help to break the gaps free and unfold…
Simple replacement part. Print with PET, ASA or even PLA. Opt for 100% infill and enough perimeters.
The rulers, the thumbscrew and the glider have been redesigned. The gauges fit concave angles now. Assembly: Two M3 nuts and a M3x16mm socket head cap screw are needed. PETG is recommended for the fastener's torque forces. No supports…
This stop fits the Proxxon KS 230 mini table saw. It allows repeatable cuts with the fence. A M4x20 hex screw and a M4 heat set insert are needed for the thumb screw. Printed with PLA, 0.3 mm layer height. The knob is pre-bridged, no…
I've ordered this interesting contraption from https://mathartfun.com ( http://www.mathmechs.com ). I hope it's as serious as it looks. The extensor grabber stl files are far from ideal to be printed. Therefore, I've cleaned them as far…
Small cap protecting from possibly dangerous unplugged C13 cables. Printed with PETG, 0.3 mm variable layer heights
Marking gauge for 1/2" steel rulers. Useful for small marking tasks, 45 and 90°. 150x13 mm ruler M3 Thumbscrew M3 heat insert D10x5 mm magnet Print the stop face down. 0.3 mm layer height and PLA work fine.
I broke this nicely shaped little bottle and decided to remake it. I know how to print it now, but haven't a clue how it was originally made :-) Since I also found some similarly shaped soaps, I made a two part mold. The bottle prints…
Small stop for the Proxxon table saw KS230 lateral fence. Intended for repeatable rip cuts with the mitre fence. It needs an M3 thumb screw and an M3 heat insert. Printed with PLA, 0.3 mm layer height and variabel layer heights.
Simple cap to protect unplugged C7 power cables (IEC 60320 C7/C8). Printed with PETG, 0.3 mm variable layer heights
Please consider using my other designs - they work better. I needed a handy platform pedal to clip on my Speedplay pedals. I wanted a small pair of platforms I could use for a short ride and then stove them into my pockets. The whole…
Optimised for vase mode (or spiral) printing. Holds 16 batteries. Often less is more. I didn't need a box holding a box inside a box sitting in a drawer... Recommended print settings: PLA, layer height 0.3 mm extrusion width 0.8 mm 2-3…
Handy when the wheel is out to prevent leaking. Should work with various different types and brands of disc breaks.
MFT flush bench dog designed to stop small items from falling through the MFT holes. Fits 20mm chamfered dog holes. A M8 nut helps to pull out the plug with a magnet. Otherwise the plug can be pushed from below or you can use some…
Segmented dust collection hose compatible with various nozzles and connectors. All parts print without any supports, with 0.3 mm constant layer height. The tolerance values between the ball and the socket part are kept tight. PLA works…
This depth gauge bridges the blade or the bit to accurately setup your table saw or router. The design comes in 3 pieces only: the arch, the lever or clamp and the thumbscrew. One M4x20 hex screw and one M4 heat set insert are needed. The…
This is a diffuser for a Godox flash light v860II. It's printed in vase mode with a more or less thick bottom shell depending on the diffusion you're after and what filament type you use. I printed 10 layers with transparent PLA filament.…
Little mouse for hand sanding with ø125mm disks. *) QnD: Quick and dirty
Easy solid scraper. Turn off the bottom layers and play with your favourite infill patterns. Check the 3mf file for the print settings.
This is a two parts sun shade for the DJI remote 2. The two parts are printed laterally without supports. They can be glued together. The cut outs allow for better operating the sticks that sit above the screen. They can be blacked out…
Adjustable feet to level furniture. Fits a ø30x15 mm hole (CNC or Forstner drill bit). Prints without supports, 0.2 mm layer height, PETG recommended. The shell is glued into the hole. The foot's height can be adjusted with a flat screw…
Little helper for the cable management. The bridge is fixed to the magnet with a M4 screw. A cable tie is laced in to hold the cables on metallic surfaces. https://www.supermagnete.ch (I am not affiliated) Print instructions: PETG layer…
Simple two part key box with 3 round magnets. The lid closes by friction fit. 3 neodym d10x3 mm needed.
Simple sunshade for the DJI RC-N1.
Simple pair of pusher for 50ml epoxy glues. No supports needed, print upright.
Not self inking :-) No infill, no supports, easy to print and easy to assemble. This stamp design is simple and ergonomic. The hollow handle is shaped to orient the stamp and to get a better grip. The label sits on top of the handle…
Build your own truncated icosahedron tile by tile. It has 12 regular pentagonal faces, 20 regular hexagonal faces, 60 vertices and 90 edges (wiki). You will need to print 12 pentagons, 20 hexagons and 40 to 60 clips ;-) Print the tiles…
This birdhouse needs to be hung on a tree. And food is hidden in the hollow walls. The design consists of the house and a thin roof that sits flush. A wooden perch of ø2.5mm should be added to welcome your favourite birds. As a test, I…
Ditched the trigger on the middle part. And did some retopo on the top part.
Just another shopping cart coin
I needed a one hand operated paper towel dispenser when cleaning SLA prints. Fits a 180 mm diameter roll with an inner diameter of 45 mm. The heavy rod keeps the paper in place and helps to tear away individual sheets. For heavier paper…
Different spools for different types of tape. Two versions are available for every size combination. Let me know if you need a another inner and outer diameter combo. Don't hesitate to post your makes and comments. Print face down, 0.3 mm…
Just print the Brio connector in spiral vase mode. On a MK3 you can print 6 or 9 plugs in one print. Have a look at the print settings of the 3mf file. The complete collection can be found here:…
I really like this little thumbscrew. Fits a M4 heat set insert. Prints fine with PLA, 0.3 mm layer height, upside down, supports not needed (bridging).
Protect you plug's pins with this little cap. Printed with PLA. Check the Swiss T11 plug here .
New GoPro 3.5 mic adapter for the Hohem iSteady 4 Pro Gimbal. Since the adapter's USB C cable cannot be expanded (!), this design combines the Hohem camera mount with an additional holster. The holster is fixed onto the camera with the…
Hide it in plain view! Box with a hidden double bottom. It's a parametric model. Let me know if you need a specific size. I may post the Fusion 360 file. Printing recommendations: PLA 0.3 mm layer height
Outdoor Enclosure for a Synology MR2200ac The one piece enclosure I tried to print with ASA warped too much. So, I designed a multi part enclosure. After a waterproof coat it should withstand heavy rain. Print instructions: ASA 0.3 mm…
You can use this ruler to mark the same increments on multiple boards. Or, you can use it as length reference to align your track saw. The stopps and markers glide on a 13x10 mm T-nut profile. The T-nut fits a M4x15 mm hex screw and the…
Raspberry Pi 4 & 2 Channel Relay Module Case This snug enclosure is designed to host a 2 channel relay and a Raspberry Pi 4. It is assembled with only two head socket screws. There is room for short jumper cables (female-female) and the…
Tray with a hook to be hung on the aluminum profile of the Festool MFT 3 table.
Not self inking :-) No infill, no supports, easy to print and easy to assemble. This stamp design is simple and ergonomic. The hollow handle is shaped to orient the stamp and to get a better grip. The label sits on top of the handle…
Hiding in plain sight: Wikipedia: «In 2023, David Smith, Joseph Samuel Myers, Craig S. Kaplan, and Chaim Goodman-Strauss posted a preprint proving the existence of a tile which when considered with its mirror image form an aperiodic…
These two sliding arrows can be used to compare two diagonals when assembling a box for example. min. length 200 mm max. length 275 mm Parts: 1x Inner rail 1x Outer rail 1x Thumbscrew 1x M3x16 Socket Head Screw screw 1x M3 square nut 1x…
Small pegs printed in vase mode to display an array of business cards or postcards. You can create a large curtain or just collect some cards you like. The print tolerances are very tight to allow a firm grip while not bonding the shells.…
***** new better design available ***** This mount fits a cold shoe for an external microphone onto the Hohem iSteady 4 Pro using a Gopro camera. Since the Gopro media mod doesn't fit on the Hohem gimbal, the Gopro 3.5 mm microphone…
SD Card Wallet Holds 5 SD cards. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 59 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not needed (0.4 mm nozzle) no…
Protects the camera and helps children taking pictures To help children learning photography, I've designed a cage with two handles. All buttons, the battery compartment and even the flash remain accessible. The tether is also maintained.…
Snap fit case for Raspberry Pi 4 and a 2 Channel Relay Module This tool free enclosure is designed to host a 2 channel relay and a Raspberry Pi 4. The Raspberry Pi is flipped by 90°. This makes the wiring easier. All DC cables run through…
Easy to print labyrinth. Based on the Amiens cathedral design. The Chartres labyrinth certainly is interesting too. Optimised to be printed in vase mode! But you can also print it as a solid body and scale the object to your desired…
