Liczymy pasujące modele…
Thanks for choosing this model! It is: Quite sturdy Designed to print using vase mode. A fast print (prints in under 2 ½ hours on a MK4). Remixable (with .step and .f3d files attached) Able to be used commercially / sold (see licence) I…
I designed this experimental case to protect my 18650 batteries from short circuits in storage. The two halves screw together, creating a cover that protects the battery. I printed it with Elegoo pla, using variable layer height (0.3mm,…
I wasn't happy with existing bit holders, so i made this! Orient as shown in the picture, slice however you like (PLA, 3 perimeters and 0.2mm layers worked for me) Does not require supports The fit into the wall inserts is quite tight;…
The settings i used where as follows: General: PLA, 0.4mm nozzle, vase mode enabled, 0.3mm layer height, three bottom layers Speed: 200mm/s external perimeters, 222mm/s solid infill, 120mm/s top solid infill, 40mm/s first layer, and 16…
This is the same as the original, but with the insert into the wall flush with the bottom of the part. Because of this, you can print it with no support material whatsoever, while still keeping the same great basic design.
This trap is designed to be either a humane live catch trap (if you leave the bucket empty), or a… not so alive catch trap (if you ~quarter fill the bucket with water) I recommend that you scale the housing to the largest size your…
This is a quality case/holder/mount/enclosure for the version 3 Raspberry Pi Camera. It snaps together with no additional hardware, screws, or glue. I printed the case in Polymaker Polylite PETG. I recommend printing in some sort of PETG…
Features: Sleek, modern look Compact Reliable perfect fit Quick & easy printing Fits USB “A” (normal) thumb drives Many sizes included (1x1 to 10x10) Parametric Print settings: Prints fine with default settings Any material should do just…
I wasn't happy with existing HSW bit holders, so i designed my own… That one didn't work well for long bits, so I made this! Orient as shown in the picture and slice however you like (PLA, 20% infill, 3 perimeters and 0.2mm layer height…
This is a simple mount / holder I designed for my 4-channel relay module (ELEGOO brand). The relay module is attached to the holder via 4 M3 screws (exact length doesn't matter much). I strongly recommend printing out of UL-certified…
You need an empty insert found here: https://www.printables.com/model/152592-honeycomb-storage-wall/files to mount this holder. Orient as shown in the picture, and slice however you like! (PLA, 3 perimeters, and 0.2mm layers worked for…
I recommend printing in vase mode and increasing the line width of outer perimeters for greater strength To do this in PrusaSlicer, make sure you are not in beginner mode. Then go to Print settings → Advanced → Extrusion width and change…
Print in a food-safe material! This is a simple printable straw I designed. It fits on most common 3d printers (Prusa MINI, Prusa MKx, Ender 3 (and similar), printers from a certain company… (that rhymes with “boo”) , etc.). As stated…
I wanted a cleaner look than existing holders for the Printables spatula, so i made this! Orient the model as shown in the picture, and slice however you like (PLA, 3 perimeters, and 0.2mm layers worked for me) Does not require supports…
This is a quick model I designed to replace a missing foot on a padded chair from Costco. I designed it to match the original as closely as possible. It slips right on easily, and doesn't fall off. Orientation doesn't matter that much, I…
This design is: A simple holder for DHT11 breakout boards. Designed to be mounted with a countersunk screw. No threaded inserts required - the single M3 screw threads directly into the holder. Able to be used commercially / sold (see…
A simple two-part holder for standard ATX Power supplies Mounts an ATX PSU to a flat surface using four M3 screws
This is an old model of mine that I'm finally uploading. It is a disk for the game Crokinole . With the right number of perimeters and infill percentage, it can match the weight of the wooden version.
just a fun thing that i designed in a few minutes
I printed the flap and the housing separately in Polymaker petg . They worked well without supports.
This latch won't work for all applications, but it should work for my Openclosure enclosure Designed to be printed in ASA, but should work in PLA
Tl;dr: You will need: # Latch (printed or otherwise) 1 Door handle (printed or otherwise) 1 Standard door hinges 2 Sheets of plywood or OSB 1 2x2s 6 Some screws ~ Follow the CAD files and use common sense. Long version: The pictures show…
This is a sleek and minimal toothbrush holder I designed. It can be customized via the parametric Fusion 360 design file, or the included STEP file. Most any material will work, I printed this in Polylite PLA. Default settings should be…
I printed this in PLA, but PETG or ASA might be better Designed to accept four M3 threaded inserts (if you want a version where the screws thread directly into the plastic add a comment saying so, and I might make it)
To wszystkie aktualnie dostępne wyniki.
