Liczymy pasujące modele…
This is a set of fins and nosecone to fit loosely on a 2L soda bottle that I designed for my son Harry for a school project They should fit loosely. use double stick tape to hold fins to the bottle and the nosecone should be loose to fall…
Back in the late 1970s and early 1980s, My grandfather carried a small flexible plastic pouch in his pocket to hold his change to keep it from rattling around. I was experimenting with TPU the other day (and still not good at using it)…
This is a Ruger EC9S/LC9S Speed Loader, I was inspired by https://www.thingiverse.com/thing:259940 this is not a remix but a complete redesign. I added a thumb hole at the top so that it is far easier to use. I have added a video to show…
This is my interpretation of the COVID-2019 Coronavirus. Being stuck at home because of this stupid thing, I decided to make a macro plastic version of it.I took inspitation from images online of the corona virus and…
This is a HI-Point C9 Speed Loader, It is just a remix of https://www.thingiverse.com/thing:4780910 . It is pretty much Identical except for the label and logo on the side I have added a video to show how it works…
My son's teacher requested these, I honestly don't know anything about Meeples, but this is what was requested.. I an putting these up here in case someone else wants them. I made them in the sizes of: .75" 1" 1.25" 1.5" 1.75" 2" 3" 4" 5"…
These are for dangling from your rear bumper/trailer hitch to show off your truck/jeep/suv's manliness. They are approximately 5 3/4 inches at their widest point. Put them on your Suzuki Samurai to show off just how buff it is! Print them…
This is a Beretta Nano BU9 Speed Loader This is a remix of https://www.thingiverse.com/thing:4780910 . It is a bit different than the Ruger model referenced here. It has a groove cut into it to accommodate the small nub on the side of the…
Got bored and hadn't done 3d work in a while so to alleviate boredom I decided to make simple pencil holders Enjoy Print Settings Printer: anet a8 Rafts: No Supports: No Resolution: .3 Infill: 10 Category: Office
Coin Sleeves for US coins in separate files I took apart the coin sleeves file to separate the individual denominations so that they may be printed in different colors, and one at a time. Print Settings Printer: TRONXY 802E Rafts: No…
ok 3rd time uploading and describing this thing (Thanks Thingiverse's glitchy interface) So... This is an Ear Hook for a Siemens Signia RUN SP behind the ear hearing aid. My wife is very hard of hearing and we bought a Siemens RUN SP…
I looked at a lot of the models of the Plumbus out there and decided that they were either too hard to print (without supports) or the quality just wasn't there. I have been practicing my cad skills, so this is what I came up with..…
Simple Fridge magnet for the fridge magnet competition.. Go Star Fleet! You too can own a piece of 24th century history with this small plastic fridge magnet! Hurry there is limited supply and our warehouse is running out fast! This is…
This is a headlight ring nut/clip/clamp/mount or whatever for a Jeep TJ Wrangler the ones on my TJ were stripped out and they would no longer hold the beauty/vanity chrome ring that goes around the headlight any more. I sorta copied…
Decided to make a rocket, couldn't find a good spin rocket so I made one.. I haven't launched it yet.. It should work. Uses Estes 18mm B or C engines. Entire rocket with C6-5 weighs in at 3 oz and stands at 510mm (1'9+") Still a work in…
Designed this for my son Harry for a school science project. Simple Helium atom model. Fairly easy to print added "Helium Refined" to the things.. looks a little better and thicker lines for stability Category: Physics & Astronomy
Sometimes I can't figure out what to do, and I get creative.. this is a form of 3d doodling, no plan, no set idea, just playing with a modeler... Hopefully someone gets something out of it. Enjoy! Print Settings Printer: Anet A8 Rafts: No…
This is a cord lock to use paracord with the Montana Mask.you will need to print 2 half bodies and a lock to make this thing. I am including the stacking 2 files and the stacking 160 bodies. I also included various sized cord locks so you…
This is the upside down hanging version of my plumbus. https://www.thingiverse.com/thing:3325747 This prints very easily at .3 and will look even better at higher resolutions. below is copy and paste from my other plumbus Granted that…
This is my interpretation of the COVID-2019 Coronavirus. Being stuck at home because of this stupid thing, I decided to make a macro plastic version of it.I took inspitation from images online of the corona virus and…
This is a bed leveling wheel for the FLSUN i3 plus or C plus. The stupid little wing nuts (or if you read the instructions for building this "butterfly nuts") that come with it are hard to adjust and annoying. These make the bed leveling…
I have a Google Home mini that seems to be hard of hearing. No mater what I did it would hardly ever respond on the first "Hey Google", in fact the one down the hall several rooms away usually heard me better than the one I was 5 feet…
I designed this soap dish for the soap dish contest. I decided to pander to the nerdiness of 3d printing enthusiasts and make a star fleet insignia soap dish.. Print it, Enjoy it, Live Long and Prosper! Printed this on a Sculpto Pro2…
The print settings for this are the same as the ones for the original, go there to read the instructions, I am gonna be lazy and not retype all that again. So lazy in fact that I am not even gonna copy and paste, too much effort.…
These are for dangling from your rear bumper/trailer hitch to show off your truck/jeep/suv's manliness. They are approximately 5 3/4 inches at the widest point and have hair on them! Put them on your Suzuki Samurai to show off just how…
I have an old Borugham Motorhome (1983) built on a 1982 Ford E-350 cutaway chassis. When working on it I decided to replace the Stereo and to do this I had to cut apart the dashboard to fit it. To support the stereo I designed and printed…
someone on facebook wanted this so I spent 4 minutes on it... it should print fine with a brim. took me longer to upload than make... internal diameter 80mm outer diameter 86mm so 3mm walls 2 versions one asymmetric with 45 degrees and…
Designed and printed this for my son Harry for a school project.. Liked this one better than the single print version I made before... looks better and more 3D Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: .2 Infill:…
This is a Fleeb for rubbing on your Plumbus, because the fleeb has all the fleeb juice! Just print the front and back in light blue PLA and the arms and mouth in red PLA. and get some googly eyes (10 mm) from the dollar store or walmart…
So I got bored while in quarantine, I have been printing Montana Masks for the local hospital and I decided to make an accessory to add just a bit of humor and creep out factor. This is only the beak, filter and some cheesy goggles.. I am…
This is an odd shaped over complicated soap dish that I designed to see if my cheapest and weirdest printer could handle it. (Sculpto Pro2 Polar coordinate) I think the weird round printer did a descent job with the massive overhangs on…
This is an X wheel for an Anet A8 or similar printer. It fits on the 5mm shaft of the Nema 17 motor that drives the X axis. Back story... I gave a printer kit I got off Ebay to a neighbor kid, who is friends with my youngest son.. He was…
This is my attempt to better my design skills.. Sat down this morning and worked this out in Designspark Mechanical.. I made this tiny V2ish rocket, was looking at a V2 on google and free handed this. enjoy Print Settings Printer: Anet A8…
This is a static solution for the sagging back plate problem. print these replacement parts to sturdy up the homeophone. It will require 4x 5mm (or sae equivalent ) screws and nuts. because of the stand design you will need varying length…
This is the #3DVFaceShield PPE from Sweden, I used it as a template and modeled stacks of 20 that can be printed all at once. On a 300x300 bed you can get 3 stacks so you can print 60 at a time on a 220x220 you can get 2 stacks so 40. Ok…
To wszystkie aktualnie dostępne wyniki.
