Liczymy pasujące modele…
This is an update of my Pi-4 case with PoE Hat to fit the new PoE+ hat . It clips together so no screws are necessary and if you need to mount it somewhere, then there’s also a separate mounting bracket. It’s designed so that you can…
This case is designed to hold a Raspberry Pi-5 and a standard 2.5” (7mm thick) SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. It’s a clip together design that requires no screws. The Pi and…
This case is designed to hold a Raspberry Pi-5 and two standard 2.5” (7mm thick) SATA SSD’s. It is based on my Raspberry Pi-5 SSD Case that was originally designed for a single SSD. The two SSD’s are mounted on top of each other, with…
This case is designed to hold a Pi-4 and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version that allows for the PoE+ Hat. The Pi and SSD…
This is a no-nonsense case for a Pi-4 with PoE Hat . ( I previously created one for the Pi3. ) It clips together so no screws are necessary and if you need to mount it somewhere, then there’s also a separate mounting bracket. The PoE Hat…
This is a simple and compact (92mm x 62mm x 30mm) case for the Pi-5 . It’s a clip together design that requires no screws and comes with an external mounting bracket if you need it. It’s designed to be used either with no fan or with a…
I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…
This is a no-nonsense case for a Pi-3 with PoE Hat . It clips together so no screws are necessary and if you need to mount it somewhere, then there’s also a separate mounting bracket. The PoE Hat is useful to power network attached…
This case is designed to hold a Pi-4 with PoE+ Hat as well as a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. Attach the PoE+ Hat to the Pi-4 using the provided screws and…
Yet another Raspberry Pi case ( I am not obsessed! You take that back! ), this time for the Pi Zero and Pi Zero 2 . It's a simple clip-together design that requires no tools or extra screws. Use it as is for a complete enclosure, or if…
My camera’s remote receiver normally mounts on the hotshoe of the camera, which is fine and good unless you also want to mount a flash or flash transmitter. When I’m doing product photography, I usually have the camera tripod mounted and…
This case is designed to hold a Pi-4 with PoE+ Hat and a standard 2.5” SATA SSD. Sometimes it’s useful to be able to boot your Pi from a SSD rather than an SD card. I’ve previously created a headless version but this one exposes the HDMI…
This clip-together Pi-4 case requires no screws and comes with an external mounting bracket if you need it. It’s designed to be used either with no fan or with a 40mm cooling fan . The fan just clips in – once again, no screws required.…
If you’re a maker, then there’s a good chance you own a Hakko soldering iron . They are a good quality iron and excellent value for money. If you own a Hakker soldering iron, then there’s a good chance that you have various sized tips…
This compact case is designed specifically for the Raspberry Pi-5 with the Pi Active Cooler and Pimoroni NVMe Base . This NVMe hat* mounts the drive under the Pi, allowing for better cooling of the Pi. I've designed the airflow so that it…
This is a replacement case for the AirGradient DIY air quality sensor that uses the v2 PCB. The biggest problem with these devices was that the temperature sensor was mounted directly on the PCB and would always read a few degrees high…
This is an adapter mount for scanning 126 film (Instamatic) on an Epson Perfection V550, V600 or V700 flatbed transparency scanner. It fits neatly into the 6cm x 22cm medium format frame, keeping the film square and flat. I’ve designed it…
I like the XIAO ESP32 , I really do. It's tiny and seems to be one of the more reliable at connecting to Wi-Fi networks. That fondness for the device suddenly dies when you need to press either of the onboard buttons. They are tiny! But…
This case is designed to fit a Raspberry Pi-5 with Waveshare PoE M.2 Hat+ . This configuration is perfect for things like a Pi-Hole or Home Assistant as the only connection you will need is a PoE enable network port. Note that I’ve…
I’m a huge fan of this Prusa i3 Raspberry Pi Camera Mount for the Raspberry Pi Camera Module 2 *. It’s a clever design that makes for incredibly stable video. I’ve been using this one for ages. There’s no vibration visible in the mount at…
This is a base designed to fit neatly on the bottom of a Sodastream Terra to allow connection to an external CO2 bottle. Using this means you can leave the rear cover on the unit and not need to cut any holes in the back. By the looks of…
The OEM plate mount for the Ioniq 5 is not designed to fit the common sized NSW plates. This is a replacement to mount the standard “NSW Slimline” plate fitted with a black plastic surround. (375mm x 100mm, including the surround.) This…
This is a remix of SnowHead's Replacement Gasket for Surefeed MBOWL Stainless Steel Cup . The only difference is that the top of the gasket is 1mm higher, allowing for a closer seal when the lid closes. Needs to be printed in a flexible…
The OEM plate mount for the Ioniq 5 is not designed to fit the common sized NSW plates. This is a replacement to mount the standard “NSW Slimline” plate fitted with a black plastic surround. (375mm x 100mm, including the surround.) This…
This is a direct replacement for a lost or broken Atlas fan remote control wall bracket. It uses the same mounting holes and general profile as the original. These remotes, manufactured by Rhine Electric, are also supplied under the…
Dahua manufactured security cameras are supplied with a basic “tamper torx” key for installation. I find them very cumbersome, particularly when the camera is installed in a tight spot. This simple handle adapts the tamper torx key into a…
This is a simple mount for the Zennio inBOX 24 v3 multifunction actuator. The website describes it as “flush mounting”, but there's no way built in to do that. The actuator simply presses into this mount and is friction held. If you are…
Not much to say, really. This clips to a 20mm garden stake and gently supports a plant about 50mm out. I'd recommend printing in PETG to ensure temperature and colour stability.
This bracket is to securely mount the Godox PB960 battery pack to a standard light stand. This is ideal if you intend to use them in the studio or on location. You can safely move the stand without worrying about the battery pack getting…
The Reclaim Heat Pump v2 Controller is designed to surface mount, usually outside. We wanted ours inside and were after a more flush mount. The perfect job for a 3D print. This is a simple fascia plate to finish off the hole in the wall…
This is a simple mount for any of the smaller Intesis KNX Gateways for Air Conditioners . (Note that there are different sized modules. This one measures 59mm wide, 36mm tall and 21mm deep.) It’s simply to allow you to securely mount the…
See GitHub for details of the project. This version of the case is for a Raspberry Pi -5 and SSD with the Weinzierl KNX Hat (Pictured below). If you are using the Tijl KNX Hat, you need to print this case . You will also need a 30mm fan…
These moulds are for you to build your very own Dalek. In your kitchen. In chocolate. The end result stands around 23cm tall (that's 9 imperial inches) and consumes almost a kilo (550 drams) of chocolate. Each section has two interlocking…
See GitHub for details of the project. This version of the case is for a Raspberry Pi -5 and SSD with the Tijl KNX hat (Pictured below). If you are using the Weinzierl KNX Hat, you will need to print this case . You will also need a 30mm…
To wszystkie aktualnie dostępne wyniki.
