Liczymy pasujące modele…
Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works. I've included the…
YALT - Just an easy way to check your leveling capabilities. Got everything tuned in? Perfectly assembled machine? PID and input shaping done? Beautiful mesh created? Slicer settings done? Superior bed adhesion? Then throw this leveling…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
Quick creation of a flat container for silica gel to use inside your Bambu Lab printer. Complete print file. Lid is a tight fit - you need to work it slowly with force in. Spacing of holes ist 1.5 mm - smaller desiccant will fall through.…
This is my quick solution on a jet-type inlet for Bestway pools. I do have a medium-sized oval framed one where the thread diameter of the inlet ist 86 mm. I separated flange and nozzle for quick and easy print. Just push the nozzle…
Inspired by other plateholders I did my own thing and created a quick version from scratch. Printed on a P1S in PLA (Prusament Galaxy Black) in less than 90 minutes with generic 0.2 profile. I used 15% infill (Cubic). Easy insert, snug…
When coloring, use the height range with a value of 0.10. Printed on a P1S using Prusament PLA Galaxy Black and default white. This is a precise fit with default settings. My puck was beaten up over the years. Remove the weight ring…
YASR is currently a work in progress. I will add more panels over time. Important: Front panels follow the measurements specified in EIA-310/Eurocard. A rack unit (U) has a height of 1 ¾ inches or 44.45 mm and for a 10" rack 254 mm in…
I created left and right side brackets so there is a small gap at the front in case you'd like to add an air tight sealing to the doors. Length is 260 mm so you can print both brackets at once on a Bambu Lab printer for example. Add some…
Simple approach to connect the Förnuftig to a 100 mm hose (you won't need a clamp). Just put it with some superglue on the corners in place (good adhesive tape might work aswell). You might want to use the air purifier without the…
These are replacement trays for the widely used small parts organizers offered frequently from Aldi (Workzone), Lidl (Parkside) and Allit (Basic 33, VarioPlus Hobby). I maxed out dimensions of the the trays and kept it as simple as…
Created a simple PCI slot cover shroud to mount an 80 mm fan for additional cooling of my GPU. Can be used with a 2-slot GPU (I've got a Inno3D 4070 Ti Super) and ATX sized MB only! Fan: Arctic P8 Slim PWM (80x80x15 mm) A 25 mm fan could…
I've been searching for a simple bracket/mount to replace my rather old filament shelf. While I liked quite a few of the designs available, I decided to do my own thing. The hole in the brackets fits 22 mm wooden rods. To make it easier I…
Replacement cover for the INNO3D LED logo light on all RTX models. Carefully remove the stock logo cover with a thin scissor/blade. Use tiny dabs of superglue on left and right side of printed part to fix it in place. Print settings: use…
A basic case/housing for the Elecrow 7" Display-D . It currently fits my needs, but I will add another backside without an attached Raspberry Pi 4. Maybe made modular so you can optionally attach the Pi in a separate Housing to it. A…
To wszystkie aktualnie dostępne wyniki.
