Liczymy pasujące modele…
It seems like a lot of folks on reddit have questions about getting their first layer height properly calibrated. A big part of the problem I think is that the prusa first layer file only has one little square at one location. So I made…
My wife made these little shelves to organize Tupperware style lids. Print instructions Category: Kitchen & Dining Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 20% Notes: I used PETG
This is a slight remix of an already excellent filament guide (see edsped's description). My only change was to add a hole to allow holding filament that is not in use (which makes it easier to have multiple spools below the table). I've…
I made this basic grip for a Sonex aircraft but it should work on other (full sized) airplanes that have a 1" steel control stick. It includes a PTT button hole suitable for a push to talk switch (digikey part nubmer 450-1664-ND). Printed…
The stick on LED strips many folks use have two problems this tries to address: They have glare due to the LEDs facing the user - so this mount angles them in slightly to face the printer. The adhesive gets weak with heat and falls down -…
This is a replacement for an aluminum 61x61x17 post cap for an aluminum railing at my house. Though I also include the onshape design file in case you want to customize it for a different size of post. Please comment or post a make if you…
This is yet another cat feeder design. It has the nice property that it is fully printable (aside from the container which comes from amazon) and uses an RC servo for dispensing. Basically works fine if paired with a Rasberry pi or…
Alas - my garmin 530 didn't fit well on my bike - because no normal handlebars. This is a quick mount that should fit most recumbents. Just use shoegoo (or other similar adhesive) to attach one of the 1/4 turn fasteners Garmin gives you…
The Ortlieb bag is slick but the mounting bracket assumes three M5 holes in the fork, spaced 64mm apart. Unfortunately my Specialized fork had only two holes, 155mm apart. So I made this adapter to let you mount to the two existing holes.…
I wanted a case that was small, easy to print and easy to assemble with two dabs of super-glue. So I made this. I hope it is useful to others. Also check out my open source project . Print instructions Category: Electronics
This is a companion for the dimensional calibration tool by LuckyPants . It allows you to place up to 4 of those tools at a 45 degree angle in an oven (or other thermal test environment). I used to for testing how annealing my PLA based…
I've previously uploaded a number of ebike designs (alas, before the current challenge), but I decided to upload this one because I think it is a good fit. Hammerhead Karoo is a really great GPS and it includes a ‘garmin’ mount adapter.…
I wanted an ergonomic handlebar grip that would work with bar-end shifters, but I couldn't find one. So I made this. It has a channel to allow the cable from the shifter to passthrough and is quite comfortable. Print in TPU with 10%…
A stylish(ish) case for the small/cheap eink board from TTGO. Also - check out my open source project for these devices. Print instructions Category: Electronics
This is a mount for attaching those inexpensive fiberglass safety flags to the back of a Performer recumbent bike/trike. Which looks a little dorky but since these recumbents are so low it is a useful increase to safety. Fits the 6mm…
These are a set of wingtip light mounts for a Sonex aircraft. Two variants are included - one for Whelen Orion lights and one for AeroLed Pulsar NXP lights. They have not yet been tested on a flying vehicle, but they should have the…
This is cosmetic cover for the aluminum Sonex flap handle. You should print it in wood PLA and attach it with glue. No warranty provided and it is up to you to ensure it works for your application. If you do use this item I'd appreciate a…
This is a follower that works with a dutch style DIY cheese press. Update: I just added a 4.5" mold version in addition to the original 6" It should work with most any mold, but it has cutouts to exactly fit this cheap mold on Amazon. The…
I purchased some of those adhesive conduits that cover low voltage wires on walls. Alas, the kit didn't include enough of the little plastic couplers. So I made this copy. Print instructions Category: Decor
I made some Octocat badges to fit my 3d printed mini cooper badge holder. I recommend printing in PETG for UV resistance. You can insert a M600 command into the gcode at the level that needs the color transition. They work with standard…
The existing badge holders seem to be made for the 1st/2nd gen. So I made this 3D printable holder. It also has the nice property of not needing to remove the grill to install the holder. Steps to install: Buy a badge on Amazon or…
Looks good in woodfill PLA. Ver 2 just posted, it has a hoop for mounting and space inside for a 600mah lipo. Also - check out my open source project for these devices. Print instructions Category: Electronics
This is a 3d printable mount for a garmin radar bike light. This radar light is a great match for recumbents because often it is a PITA to look back for cars and the radar provides great situational awareness. Also it blinks faster as…
A case for the TTGO T5 and the wide/short 2.9" e-ink screen. Print instructions Category: Gadgets
This bird-feeder hangar allows you to hand a hummingbird feeder on a glass pocket window. You can attach the hangar to the window with three pieces of velcro. Print instructions Category: Pets Print Settings Printer Brand: Prusa Printer:…
This is a mount to make it possible to attach a Garmin RTL-510 radar to a rear rack. I used it on my recumbent (which doesn't provide a conventional seatpost). It also adapts for the 5 deg tilt in the back of the rack. Other parts you'll…
Standard ebike conversion kits don't fit recumbents well. So I made a mount to fit the battery pack on the back of the boom and the chainstay. I also made a insert so that it is easy to make an anti rotation bracket for the motor out of a…
Use at your own risk. No engineering skill is promised here. This is a mount to allow you to install the 'standard' Chinese downtube battery pack onto a Performer Goal recumbent. It might fit others in their product line, I'm not sure. It…
This is a little bracket I made to mount a google aiy-vision kit to the wall. You'll need to add a 1/4"-20 bolt and a bit of sticky tape to mount it. I used it to make a twitterbot that watches for hummingbirds. Print instructions…
The 477m PCB is quite a bit smaller than the older arducam boards. This 3D printable adapter allows you to use it in designs meant for the older 30mm spacing mounting pattern.
This mount was primarily developed for telescope pier mounting. It provides basic mist/condensation protection for this fanless minipc. It won't protect from huge rain but some light sprinkles should be fine. the cable mounts on the sides…
These are adapters for the allsky camera . One fits aluminum fence posts, the other fits any flat surface (it includes slots for water drainage). If you'd like to remix these (for different post shapes for instance), it is easy to use the…
I didn't have 20mm gland nuts available. So I caded up this little adapter to allow passing an ethernet cable into the (large) hole on the allsky camera. Also this design doesn't require you to cut an end off of your ethernet cable for…
To wszystkie aktualnie dostępne wyniki.
