Liczymy pasujące modele…
This is a pretty simple tool I designed way back in 2018 to aid in cleaning the magnetic surface of 3.5" floppy disks. It is pretty straight forward, simply open the cover of the disk and sit it in the holder. This will hold the cover…
This is a tool I designed way back in 2018 to aid in cleaning the surface of 5.25inch floppy disks. It's pretty simple to use, just sit the "spindle" in the centre of the holder, lay your floppy disk on top, then place the tool on top…
This case will fit a Mean Well RT-50B power supply based on the same design as my PT-45B/PT-65B version. Both the cable entry points are on the same side of the PSU making it a bit neater when sat on top of a desk. Power switch used…
After changing a few things on my printer I found that the cooling duct I was using to cool the print was not ideal so I designed my own together with a bracket to hold it onto the MK8 extruder. This bracket also replaces the two nylon…
This is a remix of the original CrazyBob design to mount a USB floppy disk emulator inside your Amiga 1200 without having to modify your case. This version allows you to use a 0.91" OLED screen in place of the original 7-segment LED…
This is a replacement floppy eject button for the TEAC-FD235F floppy drive that can be found in the Amiga 600. There are 4 different models. One has a taper on the button which narrows slightly toward the end (like the original), the…
This is a pretty simple disk cleaning tool that I designed way back in 2018 and finally decided to release the files after being asked about it recently. I have also seen other people have taken my ideas and are selling them but not…
This is a remix of the original CrazyBob design to mount a USB floppy disk emulator inside your Amiga 600 without having to modify your case. This version allows you to use a 0.91" OLED screen in place of the original 7-segment LED…
This is a simple mounting bracket to allow you to mount your smart camera to a wall. The camera slides in place and there is a cutout in the back to allow you to feed the cable through if required. There are two versions, one with screw…
This is a remix of the original CrazyBob design to mount a USB floppy disk emulator inside your Amiga 500 without having to modify your case. This version allows you to use a 0.91" OLED screen in place of the original 7-segment LED…
This is a simple fan mount to allow for easily mounting a fan inside an Amiga 600 case. There are two versions included, one where the fan can sit loose in the bracket (I personally use small bits of BluTac to hold the fan still and stop…
This is a simple mounting bracket to allow you to mount your smart camera in a corner on a wall. The camera slides in place and there is a cutout in the back to allow you to feed the cable through if required. There are two versions, one…
This is a simple lid to cover the resin vat for the Elegoo Mars 3. This was designed using the official mechanical drawings from Elegoo as a template, so fits pretty nicely on the vat. NOTE: This is not a snug airtight fit, as there is no…
This can be used to mount the female connector of a "Slim HDMI" cable in place of the Amiga RF modulator (which first needs to be removed from the motherboard). This provides easy access externally without having to cut the case or route…
Needed a new PSU for my Amiga so thought I would use a PicoPSU. Decided to put the cable and power connector holes on the same end so it will sit nice on a desk. For the switch I used one of these: http://www.ebay.co.uk/itm/281565424907…
I have a couple of PNP pods and find they often weep a little when left for a while. To save them leaving a wet patch I created these simple stands to store spare pods when not in use. Print Settings Printer Brand: Creality Printer: Ender…
The stand that my Mustool G600 style microscope came with was pretty poor, so I designed this little adaptor to allow it to be easily mounted on a cheap microphone stand. You will need the parts from the original stand (as shown in one of…
This is a case for the excellent Greaseweazle F7 from Keir Fraser. I am not a fan of cases that require screws so designed this which simply snaps together. There are two different lids available. One is solid and has no openings for the…
After having some stability issues with my Amiga 600 (with Vampire V2) due to overheating I decided to add a cooling fan. Due to the limited space I designed this to pull cool air in through the top of the case and blow this both over and…
This is a simple snap fit case for the excellent PSX2Amiga gamepad adaptor by SukkoPera. You can find details for the adaptor itself on his GitHub page by following the link below: https://github.com/SukkoPera/OpenPSX2AmigaPadAdapter…
This is not much of a major change, but after printing I found the small cable tie holes to be too small. This design replaces the round holes with rectangular cut-outs sized for a 2.5mm wide cable tie. The cut outs at the top of the…
This is simple spool holder for the CTC i3 Pro B printer. It will probably also fit some of the other i3 clones out there, such as the Geeetech. Just remove the two screws from the top right of the frame, sit the spool holder on top and…
To wszystkie aktualnie dostępne wyniki.
