Liczymy pasujące modele…
Check the published mods, you may want some of them right from the start! The improved stage movement is ESPECIALLY recommended :) This project is about an affordable, expandable and customizable microscope based around basic hardware, 3d…
UPDATE! the design of version 1 was a bit too brutal, also the air vent bracket clip was not very stable in case of a sudden turn… the new V2 solves both issues. After several iterations I now added a version 2 which looks much better,…
My daughter wanted car keys because every one in the family has car keys. The model by @Backmann3D is gorgeus and looks exactly like mom's, but I had some troubles printing that, so I redesigned it from the ground up to achieve the same…
This mod addresses some useability downsides with the dual M5 screw movement of the standard module. The independent rack and pinion movement for x and y prevents the binding issue of the two interconnected knobs, and the new gears…
These are spring loaded clamps for the “standard” plastic frames and tubes base included in the official Hadley telescope model and its metric remix version . The clamps are based on M4 hardware left over from my metric build, but will…
A simple corner shelf with cutouts for fitting on the bed frame without bumping in the screws or in the top of the vertical posts which prodtude a little bit above the horizontal beams.
EDIT: as suggested by @ 3D_print_de I added a split version so that it can be printed on the Prusa Mk3s and other 21cm format printers. The shelf has cutouts for the wire to drop as straight as possible, and in the corners in case you…
The two colors main body in the photos is not part of the model… I ran out of filament mid-print, still, I think it looks cool if you wish to do it on purpose. You will need 10 M3 screws of any lenght (glue will also do). This is a remix…
I started this as a half joke but it works, so hear me out. It is my answer to a question nobody asked, that is what's the most stupidly overthinked (I dare not say overengineered because engineering is something else) piece I could…
This accessory replaces the standard single objective nut with a three positions rotating turret. This way you can "zoom in" or "zoom out" selecting a different magnification objective. Bill of Materials One set of printed parts, printed…
DEPRECATED! User @morpion on discord came up with a simpler and more practical idea which is currently published on github here: https://github.com/XVIIarcano/Galileo-Microscope/tree/main/Mods%2FOptical%2FAccessorized%20focus%20knob If…
This mod only replaces the design of the base module adding some internal space, screws for the rubber feet and for locking the pipes are unchanged froom the standard version. You will need: - One set of printed parts, printed using the…
Edit The standard piece has a 0.2 clearance in the carabinier, in my case it opens just fine after a little initial resitance, but I added 0.3 and 0.4 clearance versions in case the standard ones bind too much on different…
This is a push-pull mechanism that uses the repulsion of 8x3 mm magnets to open small closets. Push all the way in and the magnetic repulsion will make the drawer bounce back open, press it gently and it will just close. Larger drawers,…
EDIT: Added Fusion360 file or easier remixing, internal diameter and lenght are parametric. Heads up, the parameter for internal diameter should be set 2mm wider than the actual result, I made the inner wall 1mm thicker at one point so…
This is based on Zack's Freedman's gridfinity project and it is a 5x2 tray, 6 units tall, with a cutout shaped to hold a FERM rotary tool or any similar dremel-like tool. In the unused space I added pits to hold chuck tips or other…
Designed and printed in PETG, but it is intentionally a tight fit so you may have to scale it up a bit for ABS. I am not really good with soldering, but fortunately plenty of vendors offer the Raspberry Pi Pico with pre-soldered and even…
A kamishibai (japanese storytelling theatre for kids), with 3 doors style and an insert to keep the whole thing enclosed. The doors have holes for little magnets (4 in total) to hold onto each other. I designed mine for my little girl, so…
Here I present you a customizable, modular CD holder with ejection levers. I am including a pre-assembled STL with slots for 8 CDs, but it is just an example. This is a modular system consisting of four (+1) separate parts. Full CAD files…
A cute headband with cat ears. Print with brim, supports in the ears, and one or two colorswaps for maximum kawaii :D
So, after the car keys my daughter wanted house keys (because of course!). Here is a set of keys inspired to the same popular key holder style I have for myself. The two shells are identical, they fit 4 keys on each side and should be…
I could not find a ready-made test model, so I designed one. I am sorry if something like this already exist and I just reinvented the wheel. I was printing a model space ship which had vertical planes full of tiny details coming out of…
SAFETY NOTICE: This grip is meant to offer a control point for a pipe frame (like the Hadley Telescope frame), it is NOT meant to lift anything or resist any force. …With that out of the way… here is a practical and 100% 3d printed system…
A bracket to mount a Meanwell RS 25 vertically by the bottom holes, for more reliability comprared to the side holes.
IMPORTANT NOTE: this model uses M4 hardware, I am adding the original Fusion360 file in case you want to remix/adapt for imperial or for a different tripod mount. If you are like me, you built Hadley including a tripod mount, just in…
I printed mine in Esun ABS+, had a tiny bit of warping but overall ok with the brim. Careful about not cooling it too quicly, it is one big chunk of ABS and will crack if you give it the opportunity. I also had a bit of trouble sliding…
I am 1.94 m tall, and my legs brush under the bottom of the Ikea Laneberg table, not unusable but not perfectly comfortable either. These extensions rise the table a bit to the perfect height for me… and for you, because they are…
If you are asking yourself what is that 3d printed microscope in the photos, it is this one . This adapter allows to attach a Micro 4/3 camera (tested with an OM-D E-M5 mkII) in place of the 23.2 mm eyepiece of the microscope. For best…
The model consists of two end caps left and right to give the roll ups a more polished look. There is also a joiner piece so that if you mount two blinds side by side they can look more as one piece of furniture rather than just screaming…
NOTE: this project is based around M4 hardware, I release the CAD if someone is interested in making an imperial conversion or other tweaks, but I conceived this contraption in a very non linear way and the Fusion360 timeline reflects it……
Set of brackets to suspend a Dyson V10 horizontally under a cabinet, it fetures two brackets, one for the back and one for the shaft of the vacuum, plus a smaller one to hang the rolled up wire.
Compact spices rack for hanging Bormioli Rocco (popular italian brand of glassware) 4 cl and 8 cl jars. The jars are held suspended by the collar, the fit is reasonably tight, but there is an additional 5 degrees slant to prevent them…
Another little project to soak up some leftover screws. If you have installed the Hadley rocker stiffener mod by Tom Avisar, you now have half a dozen conveniently placed horizontal beams that just scream “hang something on me” Here you…
This started as a simple decorative cover for the 15 cm carton napkin boxes of a certain famous swedish brand. I later included slots for gluing in 5x1 mm magnets, and started creating interchangeable seasonal decors, my wife loves them…
I designed a first version aiming straight at the center of the bed, but it turns out that the pi camera v2 field of view is too narrow (and the Tiny-T bed too close) so a corner was left out. If you use a wide angle camera module I'd…
I bought an Ikea Palycke basket only to find out that it doesn't really fit where I wanted to place it, so I designed these brackets to mount it under a desk. The tapered holes are made for 5 mm, flat head wood screws. Depending on how…
A box to organize and stow a a Pi Pico and ADXL345 resonance compensation kit for my voron, following the Nero3d tutorial below. I put a voron logo on it, but I am also including a blank version of the lid. The photo shows a rectangular…
I designed this to hold the hygrometer up in one corner of a Sunlu Filadryer S1, but it may be compatible with other housings as well. It features a holder and a knob, held inside and outside of the dryer by round 3x5 mm magnets. An…
The models are pre oriented, printing with a brim is necessary. Supports shouldn't be needed, the down facing plateau should bridge without issues. The fit is not super snug because I don't want to scratch the legs, since I expect the…
My daughter got this toy for Christmas, but the carton box is disproportionately huge to actually keep, so I designed a barrel themed container to hold the swords and the little pirate in a much more compact solution.
I followed the original nevermore cartridge pattern, including the 4 magnet holes, but I only placed 2, and they are plenty enough, 4 may just make the cover harder to remove.
YOUR VALET WILL LOOK LIKE THE RENDER, NOT LIKE THE PHOTO ;) Stupid me realized I measured the height wrong AFTER printing all the parts, So I had to get creative with pipe lengths and the result looks a bit more stocky than I intended, my…
These adapters mount on the Nevermore V6 filter in place of the activated carbon cartridges, and direct an air flow towards the top of the print on Voron Tirdent and similar machines. I designed mine for the Tiny-T (150 mm down sized…
A little holder that goes in the hex pattern of the voron skirts (modeled and tested on the TinyT version) and has two prongs spaced for the dual USB port on the BTT U2C (USB to CAN adapter) to hold it if you do not have better hard…
DISCLAIMER - the photo I uploaded refers to version 1 of this design, while according to Fusion the one I posted is V54. Please see the end of this post for the details. My daughter's legs have grown too long for the first step of this…
I drew the hole at 2 mm, but in my case, printed in PETG, I still had to ream the hole a little with a drill bit before I could slide in the filament. I am uploading versions already made to different tolerances for convenience.
This model is inspired by the popular Little Alchemy online game and apps, to propose a creative and educational pen-and-paper activity. In the description below I explain how I adapted it as an “educational trick” for my own daughter,…
A simple standoff for moving the rail a bit farther from the wall, making it more practical as a towel holder
I tried a bunch of other models here on Printables, but all expect you to print them in one piece, standing upright, meaning the blade of the bracket is in the weakest orientation possible, at risk of breaking... or worse breaking inside…
Compact spices rack for hanging Bormioli Rocco (popular italian brand of glassware) 4cl and 8 cl jars. The jars are suspended by the collar, held by the snap fit prongs, there is an additional 10 degrees slant to prevent them from sliding…
There are two versions, back and side. The back version is 4mm longer because the back panel is slightly inset compared to the side panels. Choose the one you need based on what side you will have facing the wall. These plastic pieces…
This is a headphones holder shaped as a musical note. The rod is a 12mm diameter aluminum pipe. If you want to match colors you can easily print a shaft by generating a 12mm cylinder right in the slicer. if you do so, I recommend printing…
To wszystkie aktualnie dostępne wyniki.
