Liczymy pasujące modele…
Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…
Totally customized organizer with slots for disc sizes 38, 33, 26, 23, 21, 17mm. For use with Milwaukee 48-22-8436 PACKOUT Low-Profile Compact Organizer. The discs are set at a height such that they will not fall out of the holder during…
A collection of mounts for mounting Milwaukee M12 tools onto Slatwall. They may look thin and flimsy but you'd be surprised how strong these are even in basic PLA if you print these with a lot of perimeters. I used a 0.2mm layer height…
A collection of holder and base pairs that I use to mount my Ryobi 18V tools on Slatwall. This makes your tools easily accessible and allows you to show off your collection as well. These are very similar to the other models I used to use…
An assortment of hooks for standard 3" Slatwall such as storeWall. All of these are based on the same base model that clips nicely into the Slatwall so that your hook won't pull out but can still be slid around if needed. Note that I have…
Same as mount from Artem but tweaked the holder size a bit to better fit the Wyze Cam V3 which has a slightly smaller but taller base. The existing channel for the cable pass through is a bit tighter with the V3 due to there now being the…
Simple and easy to print card holder for PSA cased cards.
Hanger that I use to hang my multi-tool blades off of Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the panels. The cross shape of the holder allows…
Similar in concept to the storeWall tripod plier storage stand but now you can print it yourself at a fraction of the price. Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with…
A little tool I printed to turn those pesky panel locks on my BMW E90….I had previously been trying to use either a big coin or a huge screwdriver but they inevitably seem to mar up the edges of your panel locks until they just get harder…
Holder that I use to mount some commonly used power screwdriver bits (standard 1/4" hex shank) on Wall Control pegboard using well nuts. There is a small recess for the well nuts such that the holder will be perfectly flush against the…
Not to be satisfied with other creations I've seen online, I set out to accurately model Hei's dagger from Darker than Black. I also ended up getting a couple of "real" ones machined from carbon steel.…
A simple light duty small shelf for use with standard 3" slatwall. I suggest printing with 4 perimeters and 15-20% infill or so. I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not…
Tested with Avante Wildcat 750 Patient Warmer and cages from Hefei MT Medical Co. Ltd. Depending on what combination of equipment you are using the spacing may be different and modifications may be necessary. I had only done measurements…
A collection of mounts for mounting Ryobi 40V tools onto Slatwall. I usually store my leaf blower without the battery inserted, just in case the little nub that holds it up can't handle the weight, but so far it seems plenty strong…
A collection of holder and base pairs that I use to mount my Ryobi tools on Craftsman Versatrack wall rail. The little hole was intended to put in a 6-32 heat-set insert for extra security, but I didn't end up needing them for the most…
Open and closed boxes for organization of things like pliers, scissors, pens, and other etc items on Slatwall. Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
Personally I prefer to keep and use drywall mud (joint compound) in a powder form rather than spackling compound because #1 it's way cheaper and #2 it doesn't dry up and expire in a month or two. You can just mix up however much powder…
A Multi-Tool blade Holder that uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. The blade holder part is more or less the…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
I wanted some way to cram my ITX TrueNAS system into my 450mm Navepoint networking rack, but couldn't find anything on the market that could fit such a short depth. The closest thing was the Sliger CX3701 at just under 15", but even that…
Pictured supporting a 08G-P5-3767-KR in a Fractal Design Define R4 case. I don't know about fitment for any other card/case combination. This brace supports things at the PCB at the corner rather than by the fan shroud like some do. It…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
A little rounded cap I printed to save my shins from destruction by this friggin table.
Remix of https://www.thingiverse.com/thing:3346069 by makkuro with color options populated for everything currently available for California Filaments PETG. Just un-hide the color you want in the 3MF file, export your G-Code, and print…
Pack your pocket hole jig and an assortment of screws all into a single Packout Compact Low Profile. I print mine out of PETG with 3 perimeters but PLA works fine as well. No supports are needed except for the two little towers that hold…
A simple stand used to mount your Stacker F-Box (https://stacker3d.com/product/f-box/) on a wall or cabinet above your 3D printer. I usually orient mine in such a way that I can remove the F-Box cover with the main part of the body still…
I wanted a 1911 tool that was dedicated for assembly only for my Kimber Stainless II. So I used the overall profile from MMDeveloper 's model: https://www.printables.com/model/235820-1911-easy-wrench-disassembly-reassembly-extended-b but…
A glue bottle holder that fits Titebond and Weldbond bottles using the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. Features an…
Fixture I use to clean the K&P Engineering S38 stainless steel oil filter used in my BMW E90. I am using this with a LDR Industries 504 1300 Garden Dehumidifier Drain Hose which fits directly over the barbed end.
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
I needed something to mount the Link2Home extension cord reel I bought from Costco to my Storewall so I've created yet another custom holder. Uses 3x M5 20mm length bolts and nuts from this kit here: https://www.amazon.com/dp/B07HVRJW5J…
Pop Clip-in accessories compatible with a not-to-be-named Media Enclosure brand because they are a-holes and issue takedown requests for everything. Push-lock pins I use: https://www.amazon.com/gp/product/B008A0GNA8 The holes appear to be…
Stands an Iceriver AL0 or KS0 ASIC upright with the power cable oriented down for good cooling and a smaller footprint. Supports from build plate are required. The PSU that Iceriver sells with it can be placed right behind it as well.
I use this for mounting my CTEK MUS 4.3 Charger bracket to Slatwall along with M5 bolts. (it just threads straight into the part I spent a lot of time trying to tweak the dimensions so that the parts would latch onto the Slatwall but not…
To wszystkie aktualnie dostępne wyniki.
